LTC1064-1 - Low Noise, 8th Order, Clock Sweepable Elliptic Lowpass Filter
The LTC®1064-1 is an 8th order, clock sweepable elliptic (Cauer) lowpass switched capacitor filter. The passband ripple is typically ±0.15dB, and the stopband attenuation at 1.5 times the cutoff frequency is 68dB or more.
An external TTL or CMOS clock programs the value of the filter’s cutoff frequency. The clock to cutoff frequency ratio is 100:1.
No external components are needed for cutoff frequencies up to 20kHz. For cutoff frequencies over 20kHz two low value capacitors are required to maintain passband flatness. The LTC1064-1 features low wideband noise and low harmonic distortion even for input voltages up to 3VRMS. In fact the LTC1064-1 overall performance completes with equivalent multiple op amp RC active realizations.
The LTC1064-1 is available in a 14-pin DIP or 16-pin surface mounted SW package.
The LTC1064-1 is pin compatible with the LTC1064-2.
特点
典型应用  | 应用
封装信息  |
| 器件型号 | 封装 | 温度 | 价格 (以 1 ~ 99 片为批量) | 价格 (以 1000 片为批量) * |
|---|---|---|---|---|
| LTC1064-1ACN#PBF | N-14 | C | $25.40 | $20.60 |
| LTC1064-1CN#PBF | N-14 | C | $15.00 | $12.35 |
| LTC1064-1CSW#PBF | SW-16 | C | $18.35 | $14.85 |
| LTC1064-1CSW#TRPBF | SW-16 | C | $14.91 |
- AN40 - Take the Mystery Out of the Switched Capacitor Filter
- AN56 - Better than Bessel Linear Phase Filters For Data Communications
- DN147 - LTC1069-X: A New Family of 8th Order Monolithic Filters in an SO-8 Package
- DN16 - Switched-Capacitor Low Pass Filters for Anti-Aliasing Applications
- DN24 - Complex Data Acquisition System Uses Few Components
- DN37 - High Dynamic Range Bandpass Filters for Communications
- R042 Reliability Data
- LTC1064-1 Footprints and Symbols
