• 简体中文
• English

LTC4076 - Dual Input Standalone Battery Charger

No external sense resistor or blocking diode is required for charging due to the internal MOSFET architecture. Internal thermal feedback regulates the battery charge current to maintain a constant die temperature during high power operation or high ambient temperature conditions. The float voltage is fixed at 4.2V and the charge current is programmed with an external resistor. The LTC4076 terminates the charge cycle when the charge current drops below the user programmed termination threshold after the final float voltage is reached. The LTC4076 can be put into shutdown mode reducing the DCIN supply current to 20µA, the USBIN supply current to 10µA, and the battery drain current to less than 2µA even with power applied to both inputs.

Other features include automatic recharge, undervoltage lockout, charge status output, power present status output to indicate the presence of wall adapter or USB power and high power/low power mode (C/5) for USB compatible applications.

特点 Charges Single-Cell Li-Ion Batteries from Wall Adapter and USB Inputs Automatic Input Power Detection and Selection Charge Current Programmable up to 950mA from Wall Adapter Input C/X Charge Current Termination Thermal Regulation Maximizes Charge Rate Without Risk of Overheating* Preset Charge Voltage with ±0.6% Accuracy 18µA USB Suspend Current in Shutdown Power Present Status Output Charge Status Output Automatic Recharge Available in a Thermally Enhanced, Low Profi le (0.75mm) 10-Lead (3mm × 3mm) DFN Package 典型应用

应用 Cellular Telephones Handheld Computers Portable MP3 Players Digital Cameras 封装信息

演示电路板