• 简体中文
• English

ICL7106：3 1/2位A/D转换器

The Maxim ICL7106/ICL7107 are monolithic analog-to-digital converters (ADCs). They have very high input impedances and require no external display drive circuitry. On-board active components include polarity and digit drivers, segment decoders, voltage reference and a clock circuit. The ICL7106 will directly drive a nonmultiplexed liquid crystal display (LCD), whereas the ICL7107 will directly drive a common anode light emitting diode (LED) display. Versatility and accuracy are inherent features of these converters. The dual-slope conversion technique automatically rejects interference signals common in industrial environments. The true differential input and reference are particularly useful when making ratiometric measurements (ohms or bridge transducers). Maxim has added a zero-integrator phase to the ICL7106 and ICL7107, eliminating overrange hangover and hysteresis effects. Finally, these devices offer high accuracy by lowering rollover error to less than one count and zero reading drift to less than 1µV/°C. These devices are used in a wide range of digital panel meter applications. Most applications, however, involve the measurement and display of analog data.

关键特性 Improved 2nd Source (see Page 3 of the full data sheet for "Maxim Advantage") Guaranteed First Reading Recovery from Overrange On-Board Display Drive Capability—No External Circuitry Required LCD—ICL7106 LED—ICL7107 High-Impedance CMOS Differential Inputs Low Noise (< 15µVP-P) without Hysteresis or Overrange Hangover Clock and Reference On-Chip True Differential Reference and Input True Polarity Indication for Precision Null Applications Monolithic CMOS Design

ICL7106、ICL7107：引脚配置 应用

数据手册DataSheet

关键参数

技术资料

• Delta-Sigma ADCs Replace Integrating ADCs for Panel Meters
• A Simple ADC Comparison Matrix
• Understanding Integrating ADCs

相关产品

• ICL7116：3 1/2位ADC，可直接驱动LCD显示/保持
• ICL7117：3 1/2位ADC，可直接驱动LCD显示/保持

订购型号