• 简体中文
• English

MAX1204：5V、8通道、串行、10位ADC，3V数字接口

可理想用于10位+5V或±5V模拟、+3V数字供电系统

The MAX1204 is a 10-bit data-acquisition system specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages. It operates with a single +5V analog supply or dual ±5V analog supplies, and combines an 8-channel multiplexer, internal track/hold, and serial interface with high conversion speed and low power consumption. A 4-wire serial interface connects directly to SPI/MICROWIRE® devices without external logic, and a serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1204 uses either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The serial interface operates at up to 2MHz. The MAX1204 features an internal 4.096V reference and a reference-buffer amplifier that simplifies gain trim. It also has a VL pin that supplies power to the digital outputs. Output logic levels (3V, 3.3V, or 5V) are determined by the value of the voltage applied to this pin. A hard-wired active-low SHDN pin and two software-selectable power-down modes are provided. Accessing the serial interface automatically powers up the device. A quick turn-on time allows the MAX1204 to be shut down between conversions, enabling the user to optimize supply currents. By customizing power-down between conversions, supply current can drop below 10µA at reduced sampling rates. The MAX1204 is available in 20-pin SSOP and PDIP packages, and is specified for the commercial and extended temperature ranges.

关键特性 8-Channel Single-Ended or 4-Channel Differential Inputs Operates from +5V Single or ±5V Dual Supplies User-Adjustable Output Logic Levels (2.7V to 5.25V) Low Power 1.5mA (Operating Mode) 2µA (Power-Down Mode) Internal Track/Hold, 133kHz Sampling Rate Internal 4.096V Reference SPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar/Bipolar Inputs 20-Pin PDIP/SSOP Pin-Compatible 12-Bit Upgrade: MAX1202

MAX1204：典型工作电路 应用 5V/3V混合供电系统 电池供电应用 数据采集 医疗仪器 过程控制

数据手册DataSheet

关键参数

质量和环境数据

• MAX1204.pdf

相关产品

• MAX11621：10位、300ksps ADC，带有FIFO和内部基准
• MAX1043：10位、多通道ADC/DAC，带有FIFO、温度传感器和GPIO端口
• MAX1040：10位、多通道ADC/DAC，带有FIFO、温度传感器和GPIO端口
• MAX1202：5V、8通道、串行、12位ADC，3V数字接口
• MAX148：+2.7V至+5.25V、低功耗、8通道、串行10位ADC

订购型号