• 简体中文
• English

MAX121：308ksps ADC，带有DSP接口和78dB SINAD

The MAX121 is a complete, BiCMOS, serial-output, sampling 14-bit analog-to-digital converter (ADC) that combines an on-chip track/hold and a low-drift, low-noise, buried-zener voltage reference with fast conversion speed and low power consumption. The throughput rate is as high as 308k samples per second (ksps). The full-scale analog input range is ±5V. The MAX121 utilizes the successive-approximation architecture with a high-speed DAC to achieve both fast conversion speeds and low-power operation. Operating with +5V and -12V or -15V power supplies, power consumption is only 210mW. The MAX121 can be directly interfaced to the serial port of most popular digital-signal processors, and comes in space-saving 16-pin DIP and SO and smaller 20-pin SSOP packages. The MAX121 operates with TTL- and CMOS-compatible clocks in the frequency range from 1.1MHz to 5.5MHz. All logic inputs and outputs are TTL- and CMOS-compatible. This data sheet includes application notes for easy interface to TMS320, µPD77230, and ADSP2101 digital-signal processors, as well as µPs using the Motorola SPI and QSPI interface standards.

关键特性 14-Bit Resolution 2.9µs Conversion Time/308ksps Throughput 400ns Acquisition Time Low Noise and Distortion 78dB SINAD -85dB THD ±5V Bipolar Input Range, Overvoltage Tolerant to ±15V 210mW Power Dissipation Continuous-Conversion Mode Available 30ppm/°C, -5V Internal Reference Interfaces to DSP Processors 16-Pin DIP and SO Packages, 20-Pin SSOP Package

MAX121：引脚配置 应用 数字信号处理 频谱分析

数据手册DataSheet

关键参数

开发工具

• MAX121EVKIT

质量和环境数据

• MAX121.pdf

相关产品

• MAX11101：14位、+5V、200ksps ADC，具有10µA关断模式
• MAX1145：150ksps、14位ADC，3.3V单电源供电
• MAX1062：14位、+5V、200ksps ADC，带有10µA关断
• MAX1142：14位ADC，200ksps、+5V单电源供电，内置电压基准
• MAX122：500ksps、12位ADC，带有采样/保持和电压基准
• MAX120：500ksps、12位ADC，带有采样/保持和电压基准

订购型号