• 简体中文
• English

MAX1245：+2.375V、低功耗、8通道、串行12位ADC

可理想用于2.5V 12位系统

The MAX1245 12-bit data-acquisition system combines an 8-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and ultra-low power consumption. It operates from a single +2.375V to +3.3V supply, and its analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface directly connects to SPI™, QSPI™, and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1245 works with an external reference, and uses either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. This device provides a hard-wired active-low SHDN pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface powers up the MAX1245, and the quick turn-on time allows it to be shut down between conversions. This technique can cut supply current to under 10µA at reduced sampling rates. The MAX1245 is available in a 20-pin DIP package and an SSOP that occupies 30% less area than an 8-pin DIP. For supply voltages from +2.7V to +5.25V, use the pin-compatible MAX147.

关键特性 Single +2.375V to +3.3V Operation 8-Channel Single-Ended or 4-Channel Differential Analog Inputs Low Power: 0.8mA (100ksps) 10µA (1ksps) 1µA (power-down mode) Internal Track/Hold, 100kHz Sampling Rate SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar or Bipolar Inputs 20-Pin DIP/SSOP Packages

MAX1245：典型工作电路 应用 电池供电应用 数据采集 医疗仪器 便携式数据记录

数据手册DataSheet

关键参数

相关产品

• MAX11637：12位、300ksps ADC，带有差分采样/保持和内部基准
• MAX11629：12位、300ksps ADC，带有FIFO和内部电压基准
• MAX147：+2.7V、低功耗、8通道、串行12位ADC

订购型号