• 简体中文
• English

MAX1485：软件可选的、半/全双工、限摆率、12Mbps、RS-485/RS-422收发器，µMAX封装

The MAX1481/MAX1484/MAX1485/MAX1486 provide software-selectable, half-/full-duplex, low-power, slew-rate- limited, and high-speed (12Mbps) RS-485/RS-422 operation in a 10-pin µMAX® package—the smallest 10-pin package available. The software-selectable, half-/full-duplex MAX1485/MAX1486 make obsolete the normally larger and more expensive solutions required for selectable half-/full-duplex RS-485/RS-422 operation: 1) a 14-pin, full-duplex transceiver configured via jumpers between receiver and transmitter lines, or 2) two 8-pin, half-duplex transceivers, which require an additional inverter logic gate for software selectability. The MAX1481/MAX1484 are functionally equivalent to the industry-standard MAX491 and 75180, and are designed for space-constrained, full-duplex RS-422 applications. All parts contain one driver and one receiver and feature a 1/8-unit-load receiver input impedance, allowing up to 256 transceivers on the bus. The MAX1481/MAX1485 feature reduced-slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 250kbps. The MAX1484/MAX1486 driver slew rates are not limited, allowing them to transmit up to 12Mbps. The MAX1481/MAX1484/MAX1485/MAX1486 draw only 300µA of supply current. The MAX1481 has a low-power shutdown mode that reduces supply current to only 0.1µA. All devices operate from a single 5V supply. Drivers are output short-circuit current limited and are protected against excessive power dissipation by thermal-shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

关键特性 10-Pin µMAX Package: Smallest 10-Pin Package Software-Selectable Half-/Full-Duplex Operation (MAX1485/MAX1486) 0.1µA Low-Current Shutdown Mode (MAX1481) Slew-Rate Limiting Allows Error-Free Data Transmission (MAX1481/MAX1485) 12Mbps High-Speed Operation (MAX1484/MAX1486) Allow up to 256 Transceivers on the Bus

MAX1481、MAX1484：引脚配置 应用 电池供电应用 手持式装置 工业控制局域网 电平转换器 低功耗RS-422/RS-485通信 用于EMI敏感应用的收发器

数据手册DataSheet

关键参数

技术资料

• Explanation of Maxim RS-485 Features

质量和环境数据

• MAX1485.pdf

订购型号