• 简体中文
• English

MAX198：6通道、多量程、5V、12位DAS，带有12位总线接口和故障保护

±17V故障保护ADC，可通过软件选择输入量程

The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are independently software programmable for a variety of ranges: ±10V, ±5V, 0V to +10V, and 0V to +5V for the MAX196; ±VREF, ±VREF/2, 0V to +VREF, and 0V to +VREF/2 for the MAX198. This range switching increases the effective dynamic range to 14 bits and provides the flexibility to interface ±12V, ±15V, and 4mA to 20mA powered sensors to a single +5V system. In addition, these converters are fault protected to ±16.5V; a fault condition on any channel will not affect the conversion result of the selected channel. Other features include a 5MHz bandwidth track/hold, 100ksps throughput rate, software-selectable internal/external clock, internal/external acquisition control, 12-bit parallel interface, and internal 4.096V or external reference. Two programmable power-down modes (STBYPD, FULLPD) provide low-current shutdown between conversions. In STBYPD mode, the reference buffer remains active, eliminating start-up delays. The MAX196/MAX198 employ a standard microprocessor (µP) interface. A three-state data I/O port is configured to operate with 16-bit data buses, and data-access and bus-release timing specifications are compatible with most popular µPs. All logic inputs and outputs are TTL/CMOS compatible. These devices are available in 28-pin DIP, wide SO, SSOP (55% smaller in area than wide SO), and ceramic SB packages. For 8+4 bus interface, see the MAX197 and the MAX199 data sheets. An evaluation kit is available (MAX196EVKIT-DIP).

关键特性 12-Bit Resolution, 1/2 LSB Linearity Single +5V Supply Operation Software-Selectable Input Ranges: ±10V, ±5V, 0V to +10V, 0V to +5V (MAX196) ±VREF, ±VREF/2, 0V to +VREF, 0V to +VREF/2 (MAX198) Internal 4.096V or External Reference Fault-Protected Input Multiplexer 6 Analog Input Channels 6µs Conversion Time, 100ksps Sampling Rate Internal or External Acquisition Control Two Power-Down Modes Internal or External Clock

MAX196、MAX198：功能框图 应用 自动测试设备(ATE) 数据采集 工业控制系统 医疗仪器 机器人技术 电信

数据手册DataSheet

关键参数

开发工具

• MAX196EVKIT

技术资料

• Analog-Signal Data Acquisition in Industrial Automation Systems

相关产品

• MAX1265：265ksps、+3V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1266：420ksps、+5V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1294：420ksps、+5V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1295：265ksps、+3V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX197：多量程(±10V, ±5V, +10V, +5V)、单+5V、12位数DAS，8+4总线接口
• MAX199：8通道、多量程、5V、12位DAS，8+4总线接口和故障保护

订购型号