MAX4370:电流调节热插拔控制器,带有DualSpeed/BiLevel故障保护

The MAX4370 is a circuit-breaker IC designed to offer protection in hot-swap applications using Maxim's DualSpeed/BiLevel™ detection. This controller, designed to reside either on the backplane or on the removable card, is used to protect a system from start-up damage when a card or board is inserted into a rack with the main system power supply turned on. The card's discharged filter capacitors provide a low impedance that can momentarily cause the main power supply to collapse. The MAX4370 prevents this start-up condition by providing inrush current regulation during a programmable start-up period, allowing the system to stabilize safely. In addition, two on-chip comparators provide DualSpeed/BiLevel short-circuit protection and overcurrent protection during normal operation. The MAX4370 provides protection for a +3V to +12V single supply. An internal charge pump generates the controlled gate drive for an external N-channel MOSFET power switch. The MAX4370 latches the switch off after a fault condition until an external reset signal clears the device. Other features include a status pin to indicate a fault condition, an adjustable overcurrent response time, and a power-on reset comparator. The MAX4370 is specified for the extended-industrial temperature range (-40°C to +85°C) and is available in an 8-pin SO package.

关键特性
  • DualSpeed/BiLevel Protection During Normal Operation
  • Inrush Current Regulated at Start-Up
  • Resides Either on the Backplane or on the Removable Card
  • Programmable Start-Up Period and Response Time
  • Allows Safe Board Insertion and Removal from Live Backplane
  • Protection for +3V to +12V Single Supplies
  • Latched Off After Fault Condition
  • Status Output Pin
  • Internal Charge Pump Generates Gate Drive for External N-Channel MOSFET
MAX4370:典型工作电路
MAX4370:典型工作电路
应用
  • 热插拔板
  • 固态电路断路器
数据手册DataSheet
语言下载文件备注
英文MAX4370.pdfRev 0; 04/1999
关键参数
Part NumberVIN
(V)
VIN
(V)
Circuit Breaker/ Current LimitCircuit Breaker/Current Limit Threshold
(mV)
Fault Condition ControlChannelsPositive/Negative RailFeaturesPackage/PinsBudgetary
Price
minmaxSee Notes
MAX43702.713.2Current Limit50Latched Off1PositiveDualSpeed/BiLevel Current LimitSOIC(N)/8$3.25 @1k
技术资料
质量和环境数据
订购型号
型号状况推荐替代产品封装温度RoHS/无铅
MAX4370ESA停止供货MAX4370ESA+SOIC(N),;8引脚;30.9mm²-40°C至+85°CRoHS/无铅:否
MAX4370ESA+生产中SOIC(N),;8引脚;30.9mm²-40°C至+85°CRoHS/无铅:无铅
MAX4370ESA+T生产中SOIC(N),;8引脚;30.9mm²-40°C至+85°CRoHS/无铅:无铅
MAX4370ESA-T停止供货MAX4370ESA+TN.SO;8引脚-40°C至+85°C参考数据资料
MAX4370.pdf MAX4370
MAX4370.pdf MAX4370
MAX4370.pdf MAX4370
Flexible Fault Protection MAX6816
Advantages of IC-Based Hot-Swap Circuit Protection MAX5943
Flexible Hot-Swap Current Limiter Allows Thermal Protection MAX4370
MAX4370.pdf MAX4370
MAX4370.pdf MAX4370