• 简体中文
• English

MAX504：5V、低功耗、电压输出、串行10位DAC

单通道、串行、电压输出DAC，采用SO封装

The MAX504/MAX515 are low-power, voltage-output, 10-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. the MAX504 can also be operated with ±5V supplies. The MAX515 draws only 140µA, and the MAX504 (with internal reference) draws only 260µA. The MAX515 comes in 8-pin DIP and SO packages, while the MAX504 comes in 14-pin DIP and SO packages. Both parts have been trimmed for offset voltage, gain, and linearity, so no further adjustment is necessary. The MAX515's buffer is fixed at a gain of 2. The MAX504's internal op amp may be configured for a gain of 1 or 2, as well as for unipolar or bipolar output voltages. The MAX504 can also be used as a four-quadrant multiplier without external resistors or op amps. For parallel data inputs, see the MAX503 data sheet. For a hardware and software compatible 12-bit upgrade, refer to the MAX531/MAX538/MAX539 data sheet.

关键特性 Operate from Single +5V Supply Buffered Voltage Output Internal 2.048V Reference (MAX504) 140µA Supply Current (MAX515) INL = ±1/2LSB (max) Guaranteed Monotonic Over Temperature Flexible Output Ranges: 0V to VDD (MAX504/MAX515) VSS to VDD (MAX504) 8-Pin SO/DIP (MAX515 Power-On Reset Serial Data Output for Daisy-Chaining

MAX504、MAX515：功能原理框图 应用 音频系统 电池供电/远端工业控制 电池供电测试仪表 数字增益与失调控制 机器及运动控制设备

数据手册DataSheet

关键参数

相关产品

• MAX5158：低功耗、双路、10位、电压输出DAC，串行接口
• MAX5355：10位、电压输出DAC，8引脚µMAX封装
• MAX5354：10位、电压输出DAC，8引脚µMAX封装

订购型号