• 简体中文
• English

MAX509：四路、串行、8位DAC，满摆幅输出

四通道、串行、电压输出DAC，SSOP封装

The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs). They operate with a single +5V supply or dual ±5V supplies. Internal, precision buffers swing rail-to-rail. The reference input range includes both supply rails. The MAX509 has four separate reference inputs, allowing each DAC's full-scale range to be set independently. 20-pin DIP, SSOP, and SO packages are available. The MAX510 is identical to the MAX509 except it has two reference inputs, each shared by two DACs. The MAX510 is housed in space-saving 16-pin DIP and SO packages. The serial interface is double-buffered: A 12-bit input shift register is followed by four 8-bit buffer registers and four 8-bit DAC registers. A 12-bit serial word is used to load data into each register. Both input and DAC registers can be updated independently or simultaneously with single software commands. Two additional asynchronous control pins provide simultaneous updating (active-low LDAC) or clearing (active-low CLR) of input and DAC registers. The interface is compatible with Microwire™ and SPI™/QSPI™. All digital inputs and outputs are TTL/CMOS compatible. A buffered data output provides for readback or daisy-chaining of serial devices.

关键特性 Single +5V or Dual ±5V Supply Operation Output Buffer Amplifiers Swing Rail-to-Rail Reference Input Range Includes Both Supply Rails Calibrated Offset, Gain, and Linearity (1 LSB TUE) 10MHz Serial Interface, Compatible with SPI, QSPI (CPOL = CPHA = 0) and Microwire Double-Buffered Registers for Synchronous Updating Serial Data Output for Daisy-Chaining Power-On Reset Clears Serial Interface and Sets All Registers to Zero

MAX509、MAX510：功能框图 应用 数字衰减器 数字增益与失调控制 通用产品

数据手册DataSheet

关键参数

质量和环境数据

• MAX509.pdf

相关产品

• MAX534：+5V、低功耗、8位四路DAC，带有满摆幅输出缓冲器
• MAX520：四/八通道、2线串行8位DAC，满摆幅输出

订购型号