数据手册MAX9115 .pdf [英文Rev.0(PDF,144kB)]

{该产品的所有型号已经停产。}

The MAX9115 is a single low-voltage differential signaling (LVDS) line receiver ideal for applications requiring high data rates, low power, and low noise. The device is guaranteed to receive data at speeds up to 200Mbps (100MHz). The MAX9115 accepts an LVDS differential input and translates it to an LVTTL/LVCMOS output. The fail-safe feature sets the output high when the inputs are undriven and open, terminated, or shorted. The device supports a wide common-mode input range, allowing a ground potential difference and common-mode noise between the driver and the receiver. The MAX9115 conforms to the ANSI TIA/EIA-644 LVDS standard. The MAX9115 operates from a single +3.3V supply, and is specified for operation from -40°C to +85°C. It is available in a space-saving 5-pin SC70 package. Refer to the MAX9110/MAX9112 data sheet for single/dual LVDS line drivers.

产品关键特性
  • Space-Saving SC70 Package (50% Smaller than SOT23)
  • Guaranteed 200Mbps Data Rate
  • Low 350ps (max) Pulse Skew
  • High-Impedance LVDS Inputs When Powered Off Allow Hot Swapping
  • Conforms to ANSI TIA/EIA-644 LVDS Standard
  • Single +3.3V Supply
  • Fail-Safe Circuit Sets Output High for Undriven Inputs (Open, Terminated, or Shorted)
  • Low 150µA (typ) Supply Current in Fail-Safe Mode
应用与使用范围
  • 蜂窝电话基站
  • 时钟/数据分配
  • 数字交叉连接
  • DSLAM
  • 激光打印机
  • 网络路由器和交换机
典型应用电路

芯片订购型号
订购型号产品状态封装形式工作温度RoHS/无铅
MAX9115EXK+T停止供货SC-70;5引脚;SC70;5引脚封装信息-40°C至+85°CRoHS/无铅:无铅材料分析
MAX9115 : 单路LVDS线接收器,SC70封装 MAX9115