• 简体中文
• English

TC1307

The TC1307 combines four CMOS Low Dropout Regulators and a Microprocessor Monitor in a space-saving 16-Pin QSOP package. Designed specifically for battery-operated systems, the device’s CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current for this device is typically 220µA at full load on all four LDO channels. The TC1307 features selectable output voltages for higher design flexibility. The SELECT Mode pins allows the user to select from 4 different values (1.8V, 2.5V, 2.8V and 3.0V). An active low RESET is asserted when the output voltage VOUT2 falls below the 2.63V reset voltage threshold. Other key features for the device include ultra low-noise operation, fast response to step changes in load, and very low dropout voltage, typically 165mV at full load. The device also incorporates both over-temperature and over-current protection. Each regulator is stable with an output capacitor of only 1µF and has a maximum output current of 150mA.

文档资料

TC1307 Datasheet	Data Sheets	10/22/2002	553KB
AN761 - LDO Thermal Considerations	AppNote	11/12/2002	266KB
AN776 - DC Performance Comparisons of CMOS vs Bipolar LDOs When Operating in "Dropout" (Vin = Nominal Vout) Mode (list devices)	AppNote	11/12/2002	229KB
Analog & Interface Guide (Volume 2)	Brochures	10/11/2005	1067KB
Quick Guide to Microchip Development Tools	Brochures	10/15/2014	11223KB
Analog & Interface Product Selector Guide	Product Line Card	03/21/2016	4116KB

订购型号

器件无铅环保信息

PartNumber	DeviceWeight	ShippingWeight	LeadCount	PackageType	PackageWidth	SolderComposition	JEDECIndicator	RoHS	ChinaEFUP
TC1307R-XYVQRTR	0.083600	0.320000	16	QSOP	3.90mm(.150in)	Matte Tin	e3