• 简体中文
• English

ASL4500SHN：Four-phase boost converter

The ASL4500SHN is a highly integrated and flexible four-phase DC-to-DC boost converter IC. It has an SPI interface allowing control & diagnostic communication with an external microcontroller.

It is designed primarily for use in automotive LED lighting applications and provides an optimized supply voltage for ASLx41xSHN Multi-channel LED Buck Driver.

The ASL4500SHN has a fixed frequency peak current mode control with parabolic/non-linear slope compensation. It can operate with input voltages from 5.5 V to 40 V. It can be configured via SPI for output voltages of up to 80 V, to power the LED buck driver IC.

The ASL4500SHN is a four-phase converter which can have two independent outputs. The driver has the flexibility to be configured, via the SPI interface, as a single output converter, or with multiple combinations of number of outputs and phases.

The ASL4500SHN boost converter can drive up to four external low-side N channel MOSFETs from an internally regulated adjustable supply. It can be used to drive either logic or standard level MOSFETs.

The integrated SPI interface also allows for programming the supply under/over voltage range, output voltage range and DC-to-DC switching frequency. It enables the optimization of external components and flexibility for EMC design. This interface can also be used to provide diagnostic information such as the driver temperature.

Additional features include protection against load dump transient voltages of up to 60 V and thermal shutdown when the junction temperature of the ASL4500SHN exceeds +175 °C.

The device is housed in a very small HVQFN32 pin package and is designed to meet the stringent requirements of automotive applications. It is fully AEC Q100 grade 1 qualified. It operates over the -40 °C to +125 °C ambient automotive temperature range.

特性和优势 The ASL4500SHN is an automotive grade product that is AEC-Q100 grade 1 qualified Operating ambient temperature range of -40 °C to +125 °C Wide operating input voltage range from +5.5 V to +40 V Output voltage programmable via SPI interface Multi-Phase Operation for higher power Up to four phases per output Up to two flexible output voltages with 3 % accuracy programmable via SPI Both output voltages can be controlled independently Fixed Frequency Operation via built-in oscillator Slope Compensation tracks the frequency and output voltage Programmable control loop compensation Fast high efficiency FET switching Programmable Internal Gate Driver Voltage Regulator Gate switching is halted when overvoltage on output is detected Supports both Logic Level and Standard Level FETs Low Electro Magnetic Emission (EME) and high Electro Magnetic Immunity (EMI) Output Voltage Monitoring Supply voltage measurement Control Signal to Enable the Device Read Back programmed voltage and frequency range via SPI Junction Temperature monitoring via SPI Small Package outline HVQFN32 Low Quiescent current <5 μA at 25 °C when EN = 0 应用 Automotive LED lighting Daytime running lights Position or park light Low beam High beam Turn indicator Fog light Cornering light Daytime running lights Position or park light Low beam High beam Turn indicator Fog light Cornering light

产品图片

封装与包装

型号	封装	Outline version	Reflow-/Wave soldering	包装	产品状态	标示	可订购的器件编号, (订购码 (12NC))
ASL4500SHN	HVQFN32 (SOT617-12)	sot617-12_po	sot617-12_fr	Reel 13" Q1/T1 in Drypack	量产	Standard Marking	ASL4500SHNY( 9353 009 23518 )

无铅环保信息

型号	可订购的器件编号	RoHS / RHF	无铅转换日期	潮湿敏感度等级	MSL LF
ASL4500SHN	ASL4500SHNY		Always Pb-free	3	3

文档资料

订购信息