NX5P2553GV:Precision adjustable current-limited power switch

The NX5P2553 is a precision adjustable current-limited power switch. The device includes under voltage lockout, over-current, over-temperature, and reverse bias protection circuits designed to automatically isolate the switch terminals when a fault condition occurs. The device features two power switch terminals, one input (VIN) and one output (VOUT); a current limit input (ILIM) for defining the over-current limit; an open-drain fault output (FAULT) to indicate when a fault condition has occurred and an enable input (EN) to control the state of the switch.

The over-current limit threshold can be programmed to between 85 mA and 1.8 A using an external resistor between the ILIM and GND pins. The device has built in soft start. This feature controls the output rise time, minimizing current surges when the switch is enabled.

Designed for operation from 2.5 V to 5.5 V, it is used in power domain isolation applications to protect from out of range operation. The enable input includes integrated logic level translation making the device compatible with lower voltage processors and controllers.

特性和优势
    • Wide supply voltage range from 2.5 V to 5.5 V
    • ISW maximum 1.5 A continuous current
    • ± 6% current-limit accuracy at 1.8 A (typical)
    • Meets USB current-limiting requirements
    • Adjustable current limit from 85 mA to 1800 mA (typical)
    • Constant current mode in over-current situation
    • Over-temperature protection
    • Very low ON resistance: 95 mΩ (typical) for TSOP6 package
    • Fast short-circuit switch-off response (2.0 μs typical)
    • ILIM short detection
    • Reverse input-output voltage protection
    • Built-in soft-start
    • ESD protection:
      • HBM ANSI/ESDA/JEDEC JS-001-2012 Class 2 exceeds 2000 V
      • CDM JESD22-C101D exceeds 500 V
      • IEC61000-4-2 contact discharge exceeds 8 kV for VOUT (with external capacitance)
    • HBM ANSI/ESDA/JEDEC JS-001-2012 Class 2 exceeds 2000 V
    • CDM JESD22-C101D exceeds 500 V
    • IEC61000-4-2 contact discharge exceeds 8 kV for VOUT (with external capacitance)
    • Specified from -40 °C to +85 °C ambient temperature
应用
    • USB port/hubs
    • Digital TV and set-top boxes
    • VOIP phones
产品图片
关键参数
型号Product statusPackage name
NX5P2553GVProductionTSOP6
封装与包装
型号封装Outline versionReflow-/Wave soldering包装产品状态标示可订购的器件编号, (订购码 (12NC))
NX5P2553GV
TSOP6
(SOT457)
sot457_posot457_fr
sot457_fw
Reel 7" Q3/T4, Reverse量产Standard MarkingNX5P2553GVH( 9353 023 95125 )
无铅环保信息
型号可订购的器件编号RoHS / RHF无铅转换日期潮湿敏感度等级MSL LF
NX5P2553GVNX5P2553GVHAlways Pb-free11
文档资料
档案名称标题类型格式日期
NX5P2553 (中文)Precision adjustable current-limited power switchData sheetpdf2015-07-06
sot457_frFootprint for reflow soldering SOT457Reflow solderingpdf2010-07-13
sot457_fwFootprint for wave soldering SOT457Wave solderingpdf2009-10-08
sot457_poplastic surface-mounted package (TSOP6); 6 leadsOutline drawingpdf2009-10-08
SOT457_125Tape reel SMD; reversed product orientation 12NC ending 125Packingpdf2012-11-30
MAR_SOT457MAR_SOT457 TopmarkTop Markingpdf2013-06-03
Reflow_Soldering_ProfileReflow Soldering ProfileReflow solderingpdf2013-09-30
Wave_Soldering_ProfileWave Soldering ProfileWave solderingpdf2013-09-30
订购信息
型号订购码 (12NC)可订购的器件编号
NX5P2553GV9353 023 95125NX5P2553GVH
Precision adjustable current-limited power switch nx5p2553gv
Footprint for reflow soldering SOT457 SSL5021_SSL5031
Footprint for wave soldering SOT457 SSL5021_SSL5031
plastic surface-mounted package (TSOP6); 6 leads SSL5021_SSL5031
Tape reel SMD; reversed product orientation 12NC ending 125 74LVC2G17_Q100
MAR_SOT457 Topmark 74LVC2G17_Q100
Reflow_Soldering_Profile Wave_Soldering_Profile LPC1112FD20
Reflow_Soldering_Profile Wave_Soldering_Profile LPC1112FD20