• 简体中文
• English

MC100E310: 2:8 Differential Clock/Data Fanout Buffer

The MC100E310 is a low voltage, low skew 2:8 differential ECL fanout buffer designed with clock distribution in mind. The device features fully differential clock paths to minimize both device and system skew. The E310 offers two selectable clock inputs to allow for redundantor test clocks to be incorporated into the system clock trees.The lowest tpd delay time results from terminating only one output pair, and the greatest tpd delay time results from terminating all the output pairs. This shift is about 10-20 pS in tpd. The skew between any two output pairs within a device is typically about 25 nS. If other output pairs are not terminated, the lowest tpd delay time results from both output pairs and the skew is typically 25 nS. When all outputs are terminated, the greatest tpd (delay time) occurs and all outputs display about the same 10-20 pS increase in tpd, so the relative skew between any two output pairs remains about 25 nS.For more information on using PECL, designers should refer to ON Semiconductor Application Note AN1406/DThe VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differentia input is connected to VBB as a switching reference voltage. VBB mayalso rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.

应用注释 (17)

数据表 (1)

仿真模型 (1)

封装图纸 (1)

产品订购型号

订购产品技术参数