NCT80: Hardware Monitor with I2C serial interface
The NCT80 is a two-wire serially programmable hardware monitor. It can monitor its on chip temperature via its local sensor, 7 analog inputs and measure the speed of two fans. Each of the measured values are compared with programmable limits and if any channel is outside the programmed limit an interrupt is generated via the INT output pin. It also has a chassis intrusion detection input pin which is latched on an intrusion event.
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCT80DBR2G | Active | Pb-free
Halide free | TSSOP-24 | 948H-01 | 3 | Tape and Reel | 2500 | $3.7999 |
订购产品技术参数
| Product | Sensor Type | Data Transmission Standard | ICC Max (mA) | VCC Min (V) | VCC Max (V) | T Min (°C) | T Max (°C) | Temperature Error (°C) |
|---|
| NCT80DBR2G | Local | I2C | 0.58 | 2.8 | 5.75 | -40 | 125 | ±2 |
