These 11-bit buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable ( or) input is high, all 11 outputs are in the high-impedance state. These devices provide inverted data.
The outputs, which are designed to source or sink up to 12 mA, include equivalent 25-Ω series resistors to reduce overshoot and undershoot.
To ensure the high-impedance state during power up or power down, should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
SN74ABT5401 | |
Voltage Nodes(V) | 5 |
Vcc range(V) | 4.5 to 5.5 |
Input Level | TTL |
Output Level | TTL |
No. of Outputs | 11 |
Output Drive(mA) | -12/12 |
tpd max(ns) | 6.9 |
Static Current | 22.52 |
Logic | Inv |
Technology Family | ABT |
Rating | Catalog |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74ABT5401DW | ACTIVE | -40 to 85 | 2.90 | 1ku | SOIC (DW) | 28 | 20 | TUBE | ABT5401 |
SN74ABT5401DWE4 | ACTIVE | -40 to 85 | 2.90 | 1ku | SOIC (DW) | 28 | 20 | TUBE | ABT5401 |
SN74ABT5401DWG4 | ACTIVE | -40 to 85 | 2.90 | 1ku | SOIC (DW) | 28 | 20 | TUBE | ABT5401 |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74ABT5401DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT5401DW | SN74ABT5401DW |
SN74ABT5401DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT5401DWE4 | SN74ABT5401DWE4 |
SN74ABT5401DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT5401DWG4 | SN74ABT5401DWG4 |