These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
The ’AHCT245 devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
| CY74FCT245AT | |
| Voltage Nodes(V) | 5 |
| Rating | Catalog |
| Technology Family | ABT |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74AHCT245DW | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
| SN74AHCT245DWE4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
| SN74AHCT245DWG4 | ACTIVE | -40 to 85 | 1.15 | 1ku | SOIC (DW) | 20 | 25 | TUBE |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74AHCT245DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AHCT245DW | SN74AHCT245DW |
| SN74AHCT245DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AHCT245DWE4 | SN74AHCT245DWE4 |
| SN74AHCT245DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AHCT245DWG4 | SN74AHCT245DWG4 |
