| ADS7864 | |
| Resolution(Bits) | 12 |
| Sample Rate (max) | 500kSPS |
| Architecture | SAR |
| Power Consumption(Typ)(mW) | 52.5 |
| SINAD(dB) | 71 |
| SNR(dB) | 71 |
| SFDR(dB) | 78 |
| DNL(Max)(+/-LSB) | 1 |
| INL(Max)(+/-LSB) | 1 |
| No Missing Codes(Bits) | 12 |
| ENOB(Bits) | 11.5 |
| No. of Supplies | 1 |
| Analog Voltage AV/DD(Min)(V) | 4.75 |
| Analog Voltage AV/DD(Max)(V) | 5.25 |
| Logic Voltage DV/DD(Min)(V) | 4.75 |
| Logic Voltage DV/DD(Max)(V) | 5.25 |
| Input Configuration Range | +/-2.5 V at 2.5V |
| Reference Mode | Int and Ext |
| Rating | Catalog |
| Pin/Package | 48TQFP |
| Comments | 165 kSPS per channel |
| # Input Channels | 6 |
The ADS7864 is a dual 12-bit, 500kHz analog-to-digital (A/D) converter with 6 fully differential input channels grouped into three pairs for high speed simultaneous signal acquisition. Inputs to the sample-and-hold amplifiers are fully differential and are maintained differential to the input of the A/D converter. This provides excellent common-mode rejection of 80dB at 50kHz which is important in high noise environments.
The ADS7864 offers a parallel interface and control inputs to minimize software overhead. The output data for each channel is available as a 16-bit word (address and data). The ADS7864 is offered in a TQFP-48 package and is fully specified over the -40°C to +85°C operating range.
| 器件 | 状态 | 价格（美元） | 封装 | 引脚 |
| ADS7864Y/250 | ACTIVE | 7.35 | 1ku | TQFP (PFB) | 48 |
| ADS7864Y/250G4 | ACTIVE | 7.35 | 1ku | TQFP (PFB) | 48 |
| ADS7864Y/2K | ACTIVE | 6.65 | 1ku | TQFP (PFB) | 48 |
| ADS7864Y/2KG4 | ACTIVE | 6.65 | 1ku | TQFP (PFB) | 48 |
| ADS7864YB/250 | ACTIVE | 8.35 | 1ku | TQFP (PFB) | 48 |
| ADS7864YB/250G4 | ACTIVE | 8.35 | 1ku | TQFP (PFB) | 48 |
| ADS7864YB/2K | ACTIVE | 7.65 | 1ku | TQFP (PFB) | 48 |
| ADS7864YB/2KG4 | ACTIVE | 7.65 | 1ku | TQFP (PFB) | 48 |
