用于镍镉电池/镍氢电池、开关模式、高达 3A 的 BQ2004H 评估模块
| |
DV2004HS1 |
| 名称 |
BQ2004H Evaluation Module for NiCd/NiMH, switchmode, up to 3A |
| 状态 |
ACTIVE |
| 价格（US$） |
|
DV2004HS1 描述
The DV2004/E/H/S1 Development Systems provide a de-velopment environment for the bq2004, bq2004E, or bq2004H Fast-Charge IC. The DV2004/E/H/S1 incorporate a bq2004/E/H and a buck-type switch-mode regulator to provide fast charge controls for 4 to 10 NiCd or NiMH cells.
The fast charge is terminated by any of the following: DT/Dt, -DV or peak voltage detect, maximum temperature, maximum time, maximum voltage, or an inhibit command. Jumper settings select the voltage termination mode, the hold-off, top-off, and maximum time limits, and automatic discharge-before-charge.
The user provides a power supply and batteries. The user configures the DV2004/E/H/S1 for the number of cells, voltage, charge termination mode, and maximum charge time (with or without top-off), and commands the discharge-before-charge option with the push-button switch S1.
Please review the bq2004/E/H data sheet, before using the DV2004/E/H/S1 boards
DV2004HS1 特性
- bq2004/E/H fast-charge control evaluation and development
- Charge current sourced from an on-board switch-mode regulator (up to 3.0 A)
- Fast charge of 4 to 10 NiCd or NiMH cells and one user-defined selection
- Fast charge termination by delta temperature/delta time DT/Dt), negative delta voltage DV) or peak voltage detect, maximum temperature, maximum time, and maximum voltage
- -DV/peak voltage detect, hold-off, top-off, maximum time, and number of cells are jumper-configurable
- -DV/peak voltage detect, hold-off, top-off, maximum time, and number of cells are jumper-configurable
- Programmable charge status display
- Discharge-before-charge control with push-button switch or auto discharge-before-charge with jumper
- Inhibit fast charge by logic-level input
DV2004HS1 应用技术支持与电子电路设计开发资源下载
- TI 德州仪器电池管理产品选型与价格 . xls
DV2004HS1 相关产品
| 器件型号 |
名称 |
产品系列 |
| BQ2004H |
具有负 dV、峰值电压检测、dT/dt 终端的镍镉电池/镍氢电池开关模式充电管理 IC |
电池管理 |
