TAS5614A 150W 立体声/300W 单声道 PurePath HD 数字输入功率级
The TAS5614A is a high performance digital input Class D amplifier with integrated closed loop feedback technology (known as PurePath™ HD) with the ability to drive up to 150W Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels. Stereo into 4 to 8 Ω Speakers from a single 36V supply.
PurePath™ HD technology enables traditional AB-Amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class D amplifiers.
Unlike traditional Class D amplifiers, the distortion curve only increases once the output levels move into clipping
|
TAS5612A |
Max. Power to Bridge Tied Load |
200 |
Max. Power to Parallel Bridge Tied Load |
300 |
Min. Supported Bridge Tied Load |
3 |
Min. Supported Parallel Bridge Tied Load |
2 |
Closed/Open Loop |
Closed |
Max. Number of Speaker Outputs |
4 |
Input Type |
PWM |
Control Type |
Hardware |
Analog Supply Min [V] |
10.8 |
Analog Supply Max [V] |
13.2 |
Power Stage Supply Min (V) |
18 |
Power Stage Supply Max (V) |
38 |
TAS5614A 特性
- PurePath™ HD Enabled Integrated Feedback Provides:
- Signal Bandwidth up to 80kHz for High Frequency Content From HD Sources
- Ultralow 0.03% THD at 1W into 4Ω
- Ultralow 0.01% THD at 1W into 8Ω
- Flat THD at all Frequencies for Natural Sound
- 80dB PSRR (BTL, No Input Signal)
- >100dB (A weighted) SNR
- Click and Pop Free Startup
- Pin compatible with TAS5631, TAS5616 and TAS5612
- Multiple Configurations Possible on the Same PCB With Stuffing Options:
- Mono Parallel Bridge Tied Load (PBTL)
- Stereo Bridge Tied Load (BTL)
- 2.1 Single Ended Stereo Pair and Bridge Tied Load Subwoofer
- Total Output Power at 10%THD+N
- 300W in Mono PBTL Configuration
- 150W per Channel in Stereo BTL Configuration
- Total Output Power in BTL Configuration at 1%THD+N
- 160W Stereo into 3Ω
- 125W Stereo into 4Ω
- 85W Stereo into 6Ω
TAS5614A 芯片订购指南
器件 |
状态 |
温度 |
价格(美元) |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
TAS5614ADKD |
ACTIVE |
0 to 70 |
5.20 | 1ku |
HSSOP (DKD) | 44 |
29 | TUBE |
|
TAS5614ADKDR |
ACTIVE |
0 to 70 |
4.75 | 1ku |
HSSOP (DKD) | 44 |
500 | LARGE T&R |
|
TAS5614APHD |
ACTIVE |
0 to 70 |
5.35 | 1ku |
HTQFP (PHD) | 64 |
90 | JEDEC TRAY (5+1) |
|
TAS5614APHDR |
ACTIVE |
0 to 70 |
4.45 | 1ku |
HTQFP (PHD) | 64 |
1000 | LARGE T&R |
|
TAS5614A 质量与无铅数据
器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
TAS5614ADKD |
Green (RoHS & no Sb/Br) |
NIPDAU |
Level-4-260C-72 HR |
TAS5614ADKD |
TAS5614ADKD |
TAS5614ADKDR |
Green (RoHS & no Sb/Br) |
NIPDAU |
Level-4-260C-72 HR |
TAS5614ADKDR |
TAS5614ADKDR |
TAS5614APHD |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TAS5614APHD |
TAS5614APHD |
TAS5614APHDR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TAS5614APHDR |
TAS5614APHDR |
TAS5614A 工具与软件
TAS5614A 应用技术支持与电子电路设计开发资源下载
- TAS5614A 数据资料 dataSheet 下载.PDF
- TI 德州仪器扬声器放大器和调制器产品选型与价格 . xls