首页 > TI 德州仪器 > C2X PC 仿真器和 ARM 微处理器平台 > 其它 TMS320™；DSP

TMDS3242851-02 C2X PC 仿真器

Works with these Devices:
TMS320C2X
The C2x Simulator is a software program that uses the host processor and memory to perform instruction- and C-level simulation of the C2x DSP. It uses object code produced by the macro assembler/linker or ANSI C compiler and the standard TMS320C2x Debugger Interface. The simulator essentially provides XDS/22 software with the debug capability for a C25, C26, or C28 plus external memory without the DSP hardware.

The simulator provides cost-effective application development and program verification in non-real-time. Each of the simulator's software programs simulates C2x operation and allows monitoring of the state of the processor. Simulation speed is typically on the order of hundreds of instructions per second on a PC.

TMDS3242851-02 特性

Key features of the C2x simulator -- and common to all TMS320 software simulators -- include:

• Execution of user-oriented DSP programs on a host computer
• Modification and inspection of registers
• Data and program memory modification and display:
  • Modification of an entire block at any time
  • Initialization of memory before a program is loaded
• Simulation of peripherals, caches, and pipelined timings
• Extraction of instruction cycle timing for device performance analysis
• Programmable breakpoints on:
  • Instruction acquisition
  • Memory reads and writes(data or program)
  • Data patterns on the data bus or the program bus
  • Error conditions
• Trace on:
  • Accumulator
  • Program counter
  • Auxiliary registers
• Single-stepping of instructions

The Simulator offers the following additional features to the TMS320 Debugger Interface :

• Memory-mapped I/O can be connected to a host file to simulate I/O such as synchronous serial port I/O.
• The simulator can simulate external interrupts.
• It can monitor the opcode and address at each phase of the pipeline with 8 pseudoregisters