TPS2819-Q1 | |
No. of Outputs | 1 |
Driver Configuration | Non-Inverting |
VCC(Min)(V) | 4 |
VCC(Max)(V) | 14 |
Peak Output Current(A) | 2 |
Rise Time(ns) | 14 |
Fall Time(ns) | 14 |
Prop Delay(ns) | 24 |
Input Threshold | CMOS |
Pin/Package | 5SOT-23 |
Rating | Automotive |
Operating Temperature Range(°C) | -40 to 125 |
The TPS28xx single-channel high-speed MOSFET drivers are capable of delivering peak currents of up to 2 A into highly capacitive loads. High switching speeds (tr and tf = 14 ns typ) are obtained with the use of BiCMOS outputs. Typical threshold switching voltages are 2/3 and 1/3 of VCC. The design inherently minimizes shoot-through current.
A regulator is provided on TPS2816 through TPS2819 devices to allow operation with supply inputs between 14 V and 40 V. The regulator output can be used to power other circuits, provided power dissipation does not exceed package limitations. If the regulator is not required, VDD (the regulator input) should be connected to VCC. The TPS2816 and TPS2817 input circuits include an active pullup circuit to eliminate the need for an external resistor when using open-collector PWM controllers.
器件 | 状态 | 温度 (oC) | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
TPS2819QDBVRQ1 | ACTIVE | -40 to 125 | 0.70 | 1ku | SOT-23 (DBV) | 5 | 3000 | PAYQ |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
TPS2819QDBVRQ1 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | TPS2819QDBVRQ1 |
名称 | 型号 | 公司 | 工具/软件类型 |
音频的快速搜索选择工具 | AUDIO_SELECTION_TOOL | Texas Instruments | 免费评估工具 |
针对 Code Composer Studio 的 DCPFREETOOL 软件插件 | DCPFREETOOL | Texas Instruments | 实用程序/插件 |
TPS2819-Q1 评估模块 | TPS2819-Q1EVM | Texas Instruments | 开发电路板/EVM |
用于音频转换器的软件驱动程序 | CODECDRIVERS-SW | Texas Instruments | 应用软件 |