This 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation.
The SN74LVCH16541A is a noninverting 16-bit buffer composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Inputs can be driven from either 3.3-V or 5-V devices
SN74LVCH16541A | |
Voltage Nodes(V) | 3.3, 2.7, 2.5, 1.8 |
Vcc range(V) | 2.0 to 3.6 |
Logic | True |
Input Level | TTL/CMOS |
Output Level | LVTTL |
Output Drive(mA) | -24/24 |
No. of Outputs | 8 |
tpd max(ns) | 5.0 |
Static Current | 0.02 |
Rating | Catalog |
Technology Family | LVC |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74LVCH16541ADL | ACTIVE | -40 to 85 | 1.20 | 1ku | SSOP (DL) | 48 | 25 | TUBE | LVCH16244A |
SN74LVCH16541ADLR | ACTIVE | -40 to 85 | 1.05 | 1ku | SSOP (DL) | 48 | 1000 | LARGE T&R | LVCH16244A |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74LVCH16541ADL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCH16541ADL | SN74LVCH16541ADL |
SN74LVCH16541ADLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCH16541ADLR | SN74LVCH16541ADLR |