SN74LVTH126 具有三态输出的 3.3V ABT 四路总线缓冲器
SN74LVTH126 描述
These bus buffers are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
The ’LVTH126 devices feature independent line drivers with 3-state outputs. Each output is in the high-impedance state when the associated output-enable (OE) input is low.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver
| SN74LVTH126 | |
| Voltage Nodes(V) | 3.3, 2.7 |
| Vcc range(V) | 2.7 to 3.6 |
| Logic | True |
| Input Level | TTL |
| Output Level | CMOS |
| Output Drive(mA) | -32/+64 |
| No. of Gates | 4 |
| No. of Outputs | 4 |
| tpd max(ns) | 3.9 |
| Static Current | 7 |
| Rating | Catalog |
| Technology Family | LVT |
SN74LVTH126 特性
- Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
- Support Unregulated Battery Operation Down to 2.7 V
- Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
- Ioff and Power-Up 3-State Support Hot Insertion
- Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
SN74LVTH126 芯片订购指南
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74LVTH126D | ACTIVE | -40 to 85 | 0.28 | 1ku | SOIC (D) | 14 | 50 | TUBE | LVTH126 |
| SN74LVTH126DE4 | ACTIVE | -40 to 85 | 0.28 | 1ku | SOIC (D) | 14 | 50 | TUBE | LVTH126 |
| SN74LVTH126DG4 | ACTIVE | -40 to 85 | 0.28 | 1ku | SOIC (D) | 14 | 50 | TUBE | LVTH126 |
SN74LVTH126 质量与无铅数据
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74LVTH126D | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH126D | SN74LVTH126D |
| SN74LVTH126DE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH126DE4 | SN74LVTH126DE4 |
| SN74LVTH126DG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH126DG4 | SN74LVTH126DG4 |
SN74LVTH126 应用技术支持与电子电路设计开发资源下载
- SN74LVTH126 数据资料 dataSheet 下载.PDF
- TI 德州仪器缓冲器、驱动器/收发器产品选型与价格 . xls
- CMOS 非缓冲反向器在振荡器电路中的使用 (PDF 951 KB)
- Semiconductor Packing Methodology (PDF 3005 KB)
- 逻辑产品选择指南 2006/2007 （修订版 Z）(4462KB)
- 标准线性和逻辑产品 5 分钟指南 (786KB)
- 了解和解释标准逻辑数据表
- LOGIC Pocket Data Book (PDF 6001 KB)
- HiRel Unitrode Power Management Brochure (PDF 206 KB)
- Logic Cross-Reference (PDF 2938 KB)
