Part Number | Data Sheet | SPICE Model | HV Start-UpCircuit | StartupCurrent (µA) | UVLOThresholdon/off (V) | Gate OutputCurrent (mA) | OscillationFrequency (kHz) | CTRL Pin Low | CTRL Pin High | VOVP | OLP & SOCP | BNO | LOVP |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AP3301 | AP3301.pdf | - | No | 1 | 15.5 7.6 | 350 | 62 | - | SOVP | Latch | Auto-Recover | Auto-Recover | - |
The AP3301 is a peak-current control, Quasi-Resonant (QR) PWM controller which is optimized for high performance, low standby power and cost effective offline flyback converters.
At no load or light load, the IC will enter the burst mode to minimize standby power consumption. The minimum switching frequency (about 20kHz) is set to avoid the audible noise. At medium load, the IC will enter valley lock QR mode with frequency foldback to improve system efficiency and EMI performance. The maximum switching frequency (about 120kHz) is set to clamp the QR frequency to improve efficiency. At low line input & heavy load, when switching frequency decreases below 62KHz with output load increasing, the IC will enter CCM mode with fixed switching frequency of 62kHz to optimize low line power conversion efficiency. Furthermore, the frequency dithering function is built in to reduce EMI emission.
Internal slope compensation allows more stable peak-current mode control over wide range of input voltage and load conditions. Internal piecewise linear line compensation ensures constant output power limit over entire universal line voltage range.
Comprehensive protection features are included, such as brown out protection, cycle-by-cycle current limit (OCP), VCC Over Voltage Protection (VOVP), Secondary-Side Output OVP (SOVP), internal OTP, Over Load Protection (OLP) and pins’ fault protection.