AP8800A：中等电压DC-DC LED驱动器
| Part Number | Data Sheet | SPICE Model | Qualified to AECQ10x | PPAP Capable | Topologies (Buck) | Topologies (Buck-Boost) | Topologies (Boost) | MinimumInput Voltage (V) | MaximumInput Voltage (V) | Maximum Output Voltage (V) | Maximum LED Current (A) | LED Current Accuracy (%) | Switching Frequency Maximum (kHz) | Dimming (PWM) | Dimming (Analog) | Efficiency (%) | OperatingTemperatureRange (°C) | Sense Voltage (mV) | AEC-Q100 Grade |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AP8800A | AP8800A.pdf | - | - | - | Yes | - | - | 8 | 28 | 28 | 0.37 | 5 | 700 | Yes | Yes | 92 | -40 to +105 | 100 | - |
Description
The AP8800A is a step-down DC/DC converter designed to drive °Cs with a constant current. The device can drive up to 7 °Cs, depending on the forward voltage of the °Cs, in series from a voltage source of 8V to 28V. Series connection of the °Cs provides identical °C currents resulting in uniform brightness and eliminating the need for ballast resistors. The AP8800A switches at frequency up to 600kHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8800A is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL switches off the output MOSFET simplifying PWM dimming.
Application
- MR16 lamps
- General illumination lamps
- 1-W LED driver
Features
- °C driving current up to 370mA
- Better than 5% accuracy
- High efficiency up to 95%
- Operating input voltage from 8V to 28V
- Simple, versatile solution requiring only 4 components
- PWM/DC input for dimming control
- Built-in output open-circuit protection
- TSOT25: Available in “Green” Molding Compound (No Br, Sb) with lead Free Finish/ RoHS Compliant
订购型号
- AP8800AWT-7
TSOT25
- AP8800A.pdf AP8800A
