• 简体中文
• English

TLE6208-6G

The TLE 6208-6 G is a fully protected Hex-Half-Bridge-Driver designed specifically for automotive and industrial motion control applications. The part is based on Infineons Smart Power Technology SPT® which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuitry. The six low and high side drivers are freely configurable and can be controlled separately. Therefore all kind of loads can be combined. In motion control up to 5 actuators (DC-Motors) can be connected to the 6 halfbridge-outputs (cascade configuration). Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a standard SPI-Interface. The possibility to control the outputs via software from a central logic, allows limiting the power dissipation. So the standard PG-DSO-28-24-package meets the application requirements and saves PCB-Board-space and cost. Furthermore the build-in features like Over- and Undervoltage-Lockout, Over-Temperature-Protection and the very low quiescent current in stand-by mode opens a wide range of automotive- and industrial-applications.

Parametric TLE6208-6G RDS (on) (multiple) 800 ID(lim)(multiple) 6 x 0.8 A ID(lim)(multiple) 6 x 1.0 A Iq 10.0µA Diagnostics OC, TW, UVLO/OVLO Protect short circuit e.a. Operating Voltage  min  max 8.0V  40.0V Temperature - 40°C - 150°C Inhibit Y Mounting SMT Sales Product Name TLE6208-6G OPN TLE62086GXUMA2 Product Status active and preferred Package Name PG-DSO-28 Completely lead free yes Halogen free yes RoHS compliant yes Packing Size 1000 Packing Type TAPE & REEL Moisture Level 3

Summary of Features: Six High-Side and six Low-Side-Drivers Free configurable as switch, halfbridge or H-bridge Optimized for DC motor management applications 0.6 A continuous (1 A peak) current per switch RDS ON; typ. 0.8Ω, @ 25°C per switch Outputs fully short circuit protected with diagnosis Overtemperature-Protection with hysteresis and diagnosis Temperature prewarning Standard SPI-Interface Very low current consumption (typ. 10μA, @ 25°C) in stand-by (Inhibit) mode Over- and Undervoltage-Lockout CMOS/TTL compatible inputs with hysteresis Internal clamp diodes Enhanced power P-DSO-Package Green Product (RoHS compliant) AEC Qualified Benefits: Detailed diagnosis via SPI Device can either drive 3 motors in parallel or 4 to 5 motors in sequential mode Target Applications: Flap motor control in Heating & Ventilation Systems DC brush motor control Motor control for automotive and industrial applications

Data Sheet

Application Notes

Product Selection Guide

Material Content SheetInfo

PCB Design Data

Package Data

PCB Design Data