ISL22346WM: Quad Digitally Controlled Potentiometers (XDCP™), Low Noise, Low Power I2C® Bus, 128 Taps

The ISL22346WMVEP integrates four digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit.

The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. Each potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper. At power-up, the device recalls the contents of the two DCP's IVR to the corresponding WRs.

The DCPs can be used as a three-terminal potentiometers or as a two-terminal variable resistors in a wide variety of applications including control, parameter adjustments and signal processing.

Device Information
The specifications for an Enhanced Product (EP) device are defined in a Vendor Item Drawing (VID), which is controlled by the Defense Supply Center in Columbus (DSCC). "Hot-links" to the applicable VID and other supporting application information are provided on our website.

Key Features
  • Specifications per DSCC VID V62/08605-01XE
  • Full Mil-Temp Electrical Performance from -55°C to +125°C
  • Controlled Baseline with One Wafer Fabrication Site and One Assembly/Test Site
  • Full Homogeneous Lot Processing in Wafer Fab
  • No Combination of Wafer Fabrication Lots in Assembly
  • Full Traceability Through Assembly and Test by Date/Trace Code Assignment
  • Enhanced Process Change Notification
  • Enhanced Obsolescence Management
  • Eliminates Need for Up-Screening a COTS Component
  • Four Potentiometers in One Package
  • 128 Resistor Taps
  • I2C Serial Interface
    • Three Address Pins, Up To Eight Devices/Bus
  • Non-volatile Storage of Wiper Position
  • Wiper Resistance: 70Ω Typical @ 3.3V
  • Shutdown Mode
  • Shutdown Current 5µA Max
  • Power Supply: 2.7V to 5.5V
  • 10kΩ Total Resistance
  • High Reliability
    • Endurance: 1,000,000 Data Changes Per Bit Per Register
    • Register Data Retention:
    • 10 years @ T ≤ +125°C
    • 15 years @ T ≤ +90°C
    • 50 years @ T ≤ +55°C
  • 20 Ld TSSOP
Typical Diagram
Application Notes
TitleTypeUpdatedSizeOther Languages
AN9705: A Theoretical View of Coherent SamplingPDF13 Nov 201425 KB
AN9675: Coherent and Windowed Sampling with A/D ConvertersPDF13 Nov 2014160 KB
AN1699: Digital Control Potentiometers Offer Hidden Benefits for Many DesignsPDF13 Nov 2014129 KB
AN002: Principles of Data Acquisition and ConversionPDF13 Nov 2014257 KB
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL22346WM DatasheetPDF17 Nov 201490 KB
Software
TitleTypeUpdatedSizeOther Languages
DCP Evaluation Board Software v5.2.0EXE20 Mar 20152.73 MB
User Guides
TitleTypeUpdatedSizeOther Languages
Digital Potentiometer (DCP) Evaluation USB Kit User GuidePDF12 May 2015330 KB
Vendor Item Drawings
TitleTypeUpdatedSizeOther Languages
VID V62/08605 (ISL22346WM)PDF12 Jan 2015
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL22346WMVEP20 Ld TSSOP0.072201240
ISL22346WMVEP-TK20 Ld TSSOP T+R0.072201240
ISL22346WM Datasheet 17 Nov 2014
20 Ld TSSOP ISL22346WM
ISL22346WM
AN9705: A Theoretical View of Coherent Sampling 13 Nov 2014
AN9675: Coherent and Windowed Sampling with A/D Converters 13 Nov 2014
AN1699: Digital Control Potentiometers Offer Hidden Benefits for Many Designs 13 Nov 2014
AN002: Principles of Data Acquisition and Conversion 13 Nov 2014
DCP Evaluation Board Software v5.2.0 20 Mar 2015
Digital Potentiometer (DCP) Evaluation USB Kit User Guide 12 May 2015
VID V62/08605 (ISL22346WM) 12 Jan 2015