• 简体中文
• English

DS1306：带有闹钟的串行实时时钟

The DS1306 serial alarm real-time clock (RTC) provides a full binary coded decimal (BCD) clock calendar that is accessed by a simple serial interface. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. In addition, 96 bytes of NV RAM are provided for data storage. An interface logic-power supply input pin (VCCIF) allows the DS1306 to drive SDO and 32kHz pins to a level that is compatible with the interface logic. This allows an easy interface to 3V logic in mixed supply systems. The DS1306 offers dual-power supplies as well as a battery-input pin. The dual-power supplies support a programmable trickle charge circuit that allows a rechargeable energy source (such as a super cap or rechargeable battery) to be used for a backup supply. The VBAT pin allows the device to be backed up by a non-rechargeable battery. The DS1306 is fully operational from 2.0V to 5.5V. Two programmable time-of-day alarms are provided by the DS1306. Each alarm can generate an interrupt on a programmable combination of seconds, minutes, hours, and day. "Don't care" states can be inserted into one or more fields if it is desired for them to be ignored for the alarm condition. A 1Hz and a 32kHz clock output are also available. The DS1306 supports a direct interface to SPI™ serial data ports or standard 3-wire interface. An easy-to use address and data format is implemented in which data transfers can occur 1-byte at a time or in multiple-byte Burst Mode®.

关键特性 Completely Manages All Timekeeping Functions Real-Time Clock (RTC) Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100 96-Byte, Battery-Backed NV RAM for Data Storage Two Time-Of-Day Alarms, Programmable on Combination of Seconds, Minutes, Hours, and Day of the Week 1Hz and 32.768kHz Clock Outputs Standard Serial Port Interfaces with Most Microcontrollers Supports Motorola SPI (Serial Peripheral Interface) Modes 1 and 3 or Standard 3-Wire Interface Burst Mode for Reading/Writing Successive Addresses in Clock/RAM Multiple Power Supply Pins Ease Adding Battery For Backup Dual-Power Supply Pins for Primary and Backup Power Supplies Optional Trickle Charge Output to Backup Supply 2.0V to 5.5V Operation Optional Industrial Temperature Range: -40°C to +85°C Supports Operation in a Wide Range of Applications 20-Pin TSSOP Minimizes Required Space Underwriters Laboratory (UL®) Recognized

DS1306：典型工作电路

数据手册DataSheet

关键参数

技术资料

• Tips for Writing Bulletproof Real-Time Clock Control Code
• State Machine Logic in Binary-Coded Decimal (BCD)-Formatted Real-Time Clocks
• Oscillator Design Considerations for Low-Current Applications
• Selecting a Backup Source for Real-Time Clocks
• Interfacing an SPI RTC with a Motorola DSP
• Interfacing an SPI-Interface RTC with a PIC Microcontroller
• Using the DS32kHz with Maxim Real-Time Clocks
• Lithium Coin-Cell Batteries: Predicting an Application Lifetime
• Design Considerations for Maxim Real-Time Clocks
• Interfacing SPI Real-Time Clocks (RTCs) with a Microcontroller
• Using the Dallas Tricklecharge Timekeeper
• Crystal Considerations with Maxim Real-Time Clocks (RTCs)

质量和环境数据

• DS1306.pdf

相关产品

• DS1393：低电压SPI/3线接口RTC，带有涓流充电器
• DS1390：低电压SPI/3线接口RTC，带有涓流充电器
• DS1391：低电压SPI/3线接口RTC，带有涓流充电器
• DS1392：低电压SPI/3线接口RTC，带有涓流充电器
• DS1305：带有闹钟的串行实时时钟
• MAX6901：3线串行RTC，TDFN封装
• MAX6902：SPI兼容RTC，TDFN封装
• DS1302：带涓流充电的时钟芯片

订购型号