• 简体中文
• English

MAX114：+5V、1Msps、4及8通道、8位ADC，带有1µA关断模式

低功耗、+5V、8位ADC，并行接口

The MAX114/MAX118 are microprocessor-compatible, 8-bit, 4-channel and 8-channel analog-to-digital converters (ADCs). They operate from a single +5V supply and use a half-flash technique to achieve a 660ns conversion time (1Msps). A power-down (active-low PWRDN) pin reduces current consumption typically to 1µA. The devices return from power-down mode to normal operating mode in less than 200ns, allowing large supply-current reductions in Burst Mode® applications (in Burst Mode, the ADC wakes up from a low-power state at specified intervals to sample the analog input signals). Both converters include a track/hold, enabling the ADC to digitize fast analog signals. Microprocessor (µP) interfaces are simplified because the ADC can appear as a memory location or I/O port without external interface logic. The data outputs use latched, three-state buffer circuitry for direct connection to an 8-bit parallel µP data bus or system input port. The MAX114/MAX118 input/reference configuration enables ratiometric operation. The 4-channel MAX114 is available in a 24-pin DIP or SSOP. The 8-channel MAX118 is available in a 28-pin DIP or SSOP. For +3V applications, refer to the MAX113/MAX117 data sheet.

关键特性 Single +5V Supply Operation 4 (MAX114) or 8 (MAX118) Analog Input Channels Low Power: 40mW (operating mode) 5µW (power-down mode) Total Unadjusted Error <1LSB Fast Conversion Time: 660ns per Channel No External Clock Required Internal Track/Hold 1MHz Full-Power Bandwidth Internally Connected 8th Channel Monitors Reference Voltage (MAX118)

MAX114、MAX118：功能框图 应用 通信系统 高速DSP 便携式设备 远端数据采集

数据手册DataSheet

关键参数

质量和环境数据

• MAX114.pdf

相关产品

• MAX11120：1Msps、低功耗、12/10/8位、4/8/16通道串行ADC
• MAX11115：2Msps/3Msps、低功耗、串行12/10/8位ADC
• MAX1112：+5V、低功耗、多通道、串行8位ADC
• MAX1113：+5V、低功耗、多通道、串行8位ADC
• MAX117：+3V、400ksps、4/8通道、8位ADC，带有1µA关断模式
• MAX113：+3V、400ksps、4/8通道、8位ADC，带有1µA关断模式

订购型号