• 简体中文
• English

MAX1246：+2.7V、低功耗、4通道、串行12位ADC，QSOP-16封装

The MAX1246/MAX1247 12-bit data-acquisition systems combine a 4-channel multiplexer, high-bandwidth track/hold, and serial interface with high conversion speed and low power consumption. The MAX1246 operates from a single +2.7V to +3.6V supply; the MAX1247 operates from a single +2.7V to +5.25V supply. Both devices' analog inputs are software configurable for unipolar/bipolar and single-ended/differential operation. The 4-wire serial interface connects directly to SPI™/QSPI™ and MICROWIRE™ devices without external logic. A serial strobe output allows direct connection to TMS320-family digital signal processors. The MAX1246/MAX1247 use either the internal clock or an external serial-interface clock to perform successive-approximation analog-to-digital conversions. The MAX1246 has an internal 2.5V reference, while the MAX1247 requires an external reference. Both parts have a reference-buffer amplifier with a ±1.5% voltage-adjustment range. These devices provide a hard-wired SHDN-bar pin and a software-selectable power-down, and can be programmed to automatically shut down at the end of a conversion. Accessing the serial interface automatically powers up the MAX1246/MAX1247, and the quick turn-on time allows them to be shut down between all conversions. This technique can cut supply current to under 60µA at reduced sampling rates. The MAX1246/MAX1247 are available in a 16-pin DIP and a small QSOP that occupies the same board area as an 8-pin SO. For 8-channel versions of these devices, see the MAX146/MAX147 data sheet.

关键特性 4-Channel Single-Ended or 2-Channel Differential Inputs Single-Supply Operation: +2.7V to +3.6V (MAX1246) +2.7V to +5.25V (MAX1247) Internal 2.5V Reference (MAX1246) Low Power: 1.2mA (133ksps, 3V supply) 54µA (1ksps, 3V supply) 1µA (power-down mode) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface Software-Configurable Unipolar or Bipolar Inputs 16-Pin QSOP Package (same area as 8-pin SO)

MAX1246、MAX1247：典型工作电路 应用 电池供电应用 数据采集 医疗仪器 笔输入量化器 便携式数据记录 过程控制

数据手册DataSheet

关键参数

开发工具

• MAX1246EVKIT
• MAX1247EVKIT

质量和环境数据

• MAX1246.pdf

相关产品

• MAX11634：12位、300ksps ADC，带有差分采样/保持和内部基准
• MAX11627：12位、300ksps ADC，带有FIFO和内部电压基准
• MAX1346：12位、多通道ADC/DAC，带有FIFO、温度传感器和GPIO端口
• MAX145：+2.7V、低功耗、2通道、108ksps、串行12位ADC，8引脚µMAX封装
• MAX144：+2.7V、低功耗、2通道、108ksps、串行12位ADC，8引脚µMAX封装
• MAX146：+2.7V、低功耗、8通道、串行12位ADC
• MAX147：+2.7V、低功耗、8通道、串行12位ADC

订购型号