• 简体中文
• English

MAX1402：+5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC

+5V工作，具有最高线性度的18位Σ-Δ

The MAX1402 low-power, multichannel, serial-output analog-to-digital converter (ADC) features matched 200µA current sources for sensor excitation. This ADC uses a sigma-delta modulator with a digital decimation filter to achieve 16-bit accuracy. The digital filter’s user-selectable decimation factor allows the conversion resolution to be reduced in exchange for a higher output data rate. True 16-bit performance is achieved at an output data rate of up to 480sps. In addition, the modulator sampling frequency may be optimized for either lowest power dissipation or highest throughput rate. The MAX1402 operates from a +5V supply. This device offers three fully differential input channels that may be independently programmed with a gain between +1V/V and +128V/V. Furthermore, it can compensate an input-referred DC offset up to 117% of the selected full-scale range. These three differential channels may also be configured to operate as five pseudo-differential input channels. Two additional, fully differential system-calibration channels are provided for gain and offset error correction. The MAX1402 may be configured to sequentially scan all signal inputs and provide the results via the serial interface with minimum communications overhead. When used with a 2.4576MHz or 1.024MHz master clock, the digital decimation filter can be programmed to produce zeros in its frequency response at the line frequency and associated harmonics, ensuring excellent line rejection without the need for further post-filtering. The MAX1402 is available in a 28-pin SSOP package.

关键特性 18-Bit Resolution, Sigma-Delta ADC 16-Bit Accuracy with No Missing Codes to 480sps Low Quiescent Current 250µA (operating mode) 2µA (power-down mode) Matched On-Board Current Sources (200µA) for Sensor Excitation 3 Fully Differential or 5 Pseudo-Differential Signal Input Channels 2 Additional, Fully Differential Calibration Channels/Auxiliary Input Channels Programmable Gain and Offset Fully Differential Reference Inputs Converts Continuously or On Command Automatic Channel Scanning and Continuous Data Output Mode Operates with +5V Analog Supply and +3V or +5V Digital Supply 3-Wire Serial Interface—SPI™/QSPI™ Compatible 28-Pin SSOP Package

MAX1402：功能框图 应用 环路供电系统 便携式工业仪表 便携式称重仪 压力传感器与变送器

数据手册DataSheet

关键参数

开发工具

• MAX1400EVKIT
• MAX1402EVC16
• MAX1402EVKIT

技术资料

• Reduce the Chances of Human Error: Part 2, Super Amps and Filters for Analog Interface
• Specifying Quartz Crystals
• 3V/5V DACs Support Intelligent Current Loop

质量和环境数据

• MAX1402.pdf

相关产品

• MAX11060：24/16位、4通道、同时采样、可级联的Σ-Δ ADC
• MAX195：16位、85ksps ADC，带有10µA关断
• MAX1403：+3V、18位、低功耗、多通道、过采样(Σ-Δ) ADC
• MAX1401：+3V、18位、低功耗、多通道、过采样(Σ-Δ) ADC
• MAX1400：+5V、18位、低功耗、多通道、过采样(Σ-Δ) ADC

订购型号