• 简体中文
• English

MAX1483：20µA、1/8单位负载、限摆率、RS-485收发器

The MAX1482 and MAX1483 are low-power transceivers for RS-485 and RS-422 communication. Both feature slew-rate-limited drivers that minimize EMI and reduce reflections caused by improperly terminated cables. Data rates are guaranteed up to 250kbps. The MAX1482/MAX1483 draw only 20µA of supply current. Additionally, they have a low-current shutdown mode that consumes only 0.1µA. Both parts operate from a single +5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit. The MAX1482 is full duplex and the MAX1483 is half duplex. Both parts have a 1/8-unit-load input impedance that guarantees up to 256 transceivers on the bus.

关键特性 Low 20µA Operating Current Slew-Rate Limited for Reduced EMI and Reduced Reflections 0.1µA Low-Current Shutdown Mode Designed for RS-485 and RS-422 Applications Operate from a Single +5V Supply -7V to +12V Common-Mode Input Voltage Range Allows up to 256 Transceivers on the Bus—Guaranteed (1/8-unit load) Current Limiting and Thermal Shutdown for Driver Overload Protection

MAX1482、MAX1483：典型工作电路 应用 工业控制局域网 大规模256节点LAN 低功耗RS-485/RS-422网络 用于EMI敏感应用的收发器

数据手册DataSheet

关键参数

技术资料

• Methods for Trimming the Power Required in RS-485 Systems

质量和环境数据

• MAX1483.pdf

订购型号