MAX1711:高速、数字可调、降压型控制器,用于笔记本电脑

数字可调节降压控制器,只需四个输出电容即可为移动处理器提供12A电流

The MAX1710/MAX1711 step-down controllers are intended for core CPU DC-DC converters in notebook computers. They feature a triple-threat combination of ultra-fast transient response, high DC accuracy, and high efficiency needed for leading-edge CPU core power supplies. Maxim's proprietary Quick-PWM™ quick-response, constant-on-time PWM control scheme handles wide input/output voltage ratios with ease and provides 100ns "instant-on" response to load transients while maintaining a relatively constant switching frequency. High DC precision is ensured by a 2-wire remote-sensing scheme that compensates for voltage drops in both the ground bus and supply rail. An on-board, digital-to-analog converter (DAC) sets the output voltage in compliance with Mobile Pentium II® CPU specifications. The MAX1710 achieves high efficiency at a reduced cost by eliminating the current-sense resistor found in traditional current-mode PWMs. Efficiency is further enhanced by an ability to drive very large synchronous-rectifier MOSFETs. Single-stage buck conversion allows these devices to directly step down high-voltage batteries for the highest possible efficiency. Alternatively, 2-stage conversion (stepping down the +5V system supply instead of the battery) at a higher switching frequency allows the minimum possible physical size. The MAX1710/MAX1711 are identical except that the MAX1711 have 5-bit DACs and the MAX1710 has a 4-bit DAC. Also, the MAX1711 has a fixed overvoltage protection threshold at VOUT = 2.25V and undervoltage protection at VOUT = 0.8V whereas the MAX1710 has variable thresholds that track VOUT. The MAX1711 is intended for applications where the DAC code may change dynamically.

关键特性
  • Ultra-High Efficiency
  • No Current-Sense Resistor (Lossless ILIMIT)
  • Quick-PWM with 100ns Load-Step Response
  • ±1% VOUT Accuracy over Line and Load
  • 4-Bit On-Board DAC (MAX1710)
  • 5-Bit On-Board DAC (MAX1711/MAX1712)
  • 0.925V to 2V Output Adjust Range (MAX1711/MAX1712)
  • 2V to 28V Battery Input Range
  • 200/300/400/550kHz Switching Frequency
  • Remote GND and VOUT Sensing
  • Over/Undervoltage Protection
  • 1.7ms Digital Soft-Start
  • Drive Large Synchronous-Rectifier FETs
  • 2V ±1% Reference Output
  • Power-Good Indicator
  • Small 24-Pin QSOP Package
MAX1710、MAX1711、MAX1712:典型工作电路
MAX1710、MAX1711、MAX1712:典型工作电路
应用
  • CPU核DC-DC转换器
  • 坞站
  • 笔记本电脑
  • 单级(电池至VCORE)变换器
  • 两级(+5V至VCORE)变换器
数据手册DataSheet
语言下载文件备注
英文MAX1710-MAX1712.pdfRev 1; 07/2000
关键参数
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingDC-DC OutputsOper. Freq.
(kHz)
Package/Pins
minmaxminmaxmax
MAX17112280.9252Digital/VID7ExternalYes1550QSOP/24
开发工具
技术资料
订购型号
型号状况推荐替代产品封装温度RoHS/无铅
MAX1711C/D生产中DICE SALES,;NA引脚;DICE S;-40°C至+85°C参考数据资料
MAX1711EEG停止供货MAX1711EEG+QSOP,;24引脚;54.2mm²-40°C至+85°CRoHS/无铅:否
MAX1711EEG+生产中QSOP,;24引脚;54.2mm²-40°C至+85°CRoHS/无铅:无铅
MAX1711EEG+T生产中QSOP,;24引脚;54.2mm²-40°C至+85°CRoHS/无铅:无铅
MAX1711EEG-T停止供货MAX1711EEG+TQSOP,;24引脚;54.2mm²-40°C至+85°CRoHS/无铅:否
MAX1710-MAX1712.pdf MAX1711
Reduce the Chances of Human Error: Part 1, Power and Ground MAX5481
Layout Considerations for Non-Isolated DC-DC Converters MAX1865
典型工作电路 MAX1712