• 简体中文
• English

MAX1811：USB供电的Li+充电器

The MAX1811 is a single-cell lithium-ion (Li+) battery charger that can be powered directly from a USB port or from an external supply up to 6.5V. It has a 0.5% overall battery regulation voltage accuracy to allow maximum utilization of the battery capacity. The charger uses an internal FET to deliver up to 500mA charging current to the battery. The device can be configured for either a 4.1V or 4.2V battery, using the SELV input. The SELI input sets the charge current to either 100mA or 500mA. An open-drain output (active-low CHG) indicates charge status. The MAX1811 has preconditioning that soft-starts a near-dead battery cell before charging. Other safety features include continuous monitoring of voltage and current and initial checking for fault conditions before charging. The MAX1811 is available in a small 1.4W thermally enhanced 8-pin SO package.

关键特性 Charges Single-Cell Li+ Batteries Directly from USB Port 0.5% Overall Charging Accuracy Minimal External Components Input Diode Not Required Automatic IC Thermal Regulation Preconditions Near-Depleted Cells Convenient Power SO-8 Package (1.4W)

MAX1811：典型工作电路 应用 蜂窝电话 数码相机 手持式计算机 MP3播放器 PDA与掌上电脑 双向寻呼

数据手册DataSheet

关键参数

技术资料

• Important Design Considerations for Heart-Rate and Fitness Monitors
• Blood Glucose Meters
• Dual Comparator Thermally Protects Li+ Battery
• Protection From Blackouts: Dirt Cheap to Fully Integrated
• Add Current Boost to USB Charger Driven by an AC Adapter

质量和环境数据

• MAX1811.pdf

订购型号