MAX20070B:Integrated TFT Power Supply and LED Backlight Drivers

Integrated TFT Power Supplies and LED Backlight Driver Reduce System Component Count

The MAX20070/MAX20070B are highly integrated power supplies and LED backlight drivers for automotive TFT-LCD applications. The devices integrate one buck-boost converter, one boost converter, two gate-driver supplies, and a boost/SEPIC converter that can power one to two strings of LEDs in the display backlight. The source-driver power supplies consist of a boost converter and an inverting buck-boost converter that can generate voltages up to +15V and -15V. Both source-driver power supplies can deliver up to 100mA. The positive source-driver supply regulation voltage (VPOS) is set by connecting an external resistor-divider on FBP. Connecting the FBP pin to ground sets the regulation voltage (VPOS) to +6.5V. The negative source-driver supply voltage (VNEG) is always tightly regulated to -VPOS within &plsmn;50mV. The source-driver supplies use an input voltage from 2.7V to 5.5V to generate the output voltages. The gate-driver power supplies consist of regulated charge pumps that generate up to +22V and -22V and can deliver up to 3mA each. The regulation voltage (VGVDD) on the positive charge pump is set by a resistor-divider on FBPG; the regulation voltage (VGVEE) on the negative charge pump is set by a resistor-divider on FBNG. The ICs feature a dual-string LED driver that operates off a separate input voltage (VBATT) and can power up to two strings of LEDs with 160mA (max) of current per string. The startup and shutdown sequences for all power domains is controlled using one of the seven preset modes that are selectable through a resistor on SEQ. The MAX20070/MAX20070B are available in a 32-pin, 5mm × 5mm TQFN package with an exposed pad, and operates over the -40°C to +105°C ambient temperature range.

关键特性
  • Integrates Both TFT Power Supplies and LED Backlight Driver in One IC, Reducing Component Count
  • Alleviates EMI Due to Spread Spectrum on Both Source Driver Supplies and LED Driver
  • 10000:1 Dimming Ratio at 200Hz Dimming Frequency
  • Available in a 32-Pin (5mm × 5mm) TQFN with an Exposed Pad for Heat Dissipation and Operates Over the -40°C to +105°C Ambient Temperature Range
MAX20070: Typical Operating Circuit
MAX20070: Typical Operating Circuit
应用
  • 汽车中心显示器
  • 汽车仪表盘
  • 汽车抬头显示
  • 汽车导航系统
关键参数
Part NumberRegulation TopologyMax. No. of LEDsLED ChannelsLED ConfigurationILED per Channel
(A)
PWM Dimming Freq.
(kHz)
Dimming RatioDimming ControlPOUT
(W)
VIN
(V)
VIN
(V)
ICC
(mA)
LED String Volt.
(V)
Oper. Freq.
(kHz)
Package/Pins
maxmaxmaxminmaxmaxmax
MAX20070Inductor Based242Series-Parallel0.162010000PWM122.75.52.2521000TQFN/32
MAX20070B2100TQFN/32

Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesLCD/LED/Flash/CCD FeaturesVIN
(V)
VIN
(V)
VOUT
(V)
Max. IOUT
(A)
Oper. Freq.
(kHz)
Inverting OutputsPackage/Pins
minmaxmax
MAX20070
  • Inverting
  • Step-Up
  • Dynamic V Adj.
  • Output OVP
  • Output UVP
  • Reset Output
  • Shutdown
  • Current Limit
  • Fixed Freq./PWM
  • Internal Switch
  • Soft Start
  • TFT Bias
  • White LED
2.75.5150.110002TQFN/32
开发工具
相关产品
  • MAX16927:汽车应用TFT-LCD电源,集成boost、buck、cuk转换器以及VCOM缓冲器、栅极驱动器和SPI接口
  • MAX16838:集成2通道、高亮度LED驱动器,具有高压boost和SEPIC控制器
  • MAX8614:双输出(+和-)、DC-DC转换器,用于CCD
订购型号
型号状况推荐替代产品封装温度RoHS/无铅
MAX20070BGTJ/V+生产中TQFN,;32引脚;26mm²-40°C至+105°CRoHS/无铅:无铅
MAX20070BGTJ/V+T生产中TQFN,;32引脚;26mm²-40°C至+105°CRoHS/无铅:无铅
MAX20070B