• 简体中文
• English

MAX212：+3V供电、低功耗、真RS-232收发器

The MAX212 RS-232 transceiver is intended for 3V-powered EIA/TIA-232E and V.28/V.24 communication interfaces where three drivers and five receivers are needed with minimum power consumption. The operating voltage range extends from 3.6V down to 3.0V while still maintaining true RS-232 and EIA/TIA-562 voltage levels. A 1µA typical shutdown mode reduces power consumption, extending battery life in portable systems. While shut down, all receivers can remain active or can be disabled under logic control. This enables a system incorporating the CMOS MAX212 to be in low-power shutdown mode and monitor incoming RS-232 activity. A guaranteed data rate of 120kbps provides compatibility with popular software for communicating with personal computers. Three-state drivers on all receiver outputs are provided so that multiple receivers, generally of different interface standards, can be wire-ORed at the UART. The MAX212 is available in both small-outline (SO) and shrink-small-outline (SSOP) packages. The SSOP package occupies less than half of the board area required by the equivalent SO package.

关键特性 Operates from Single +3.0V to +3.6V Supply 24-Pin SSOP or Wide SO Packages Meets All EIA/TIA-232E and EIA/TIA-562 Specifications 3mA Max Supply Current (Unloaded) 1µA Low-Power Shutdown Mode All Receivers Active During Low-Power Shutdown Mouse Compatible at 3.0V Low-Cost, Surface-Mount External Components 120kbps Guaranteed Data Rate-LapLink™ Compatible Three-State Receiver Outputs Evaluation Kit Available Flow-Through Pinout

MAX212：典型工作电路 应用 计算机：笔记本电脑/掌上电脑/亚笔记本电脑 仪表 外设 打印机

数据手册DataSheet

关键参数

技术资料

• Determining Clock Accuracy Requirements for UART Communications

订购型号