• 简体中文
• English

MAX218：1.8V至4.25V供电、双路、真RS-232收发器

The MAX218 RS-232 transceiver is intended for battery-powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 and EIA/TIA-562 voltage levels. The MAX218 runs from two alkaline, NiCd, or NiMH cells without any form of voltage regulator. A shutdown mode reduces current consumption to 1µA, extending battery life in portable systems. While shut down, all receivers can remain active or can be disabled under logic control, permitting a system incorporating the CMOS MAX218 to monitor external devices while in low-power shutdown mode. A guaranteed 120kbps data rate provides compatibility with popular software for communicating with personal computers. Three-state drivers are provided on all receiver outputs so that multiple receivers, generally of different interface standards, can be wire-ORed at the UART. The MAX218 is available in 20-pin DIP, SO, and SSOP packages.

关键特性 Operates Directly from Two Alkaline, NiCd, or NiMH Cells +1.8V to +4.25V Supply Voltage Range 120kbps Data Rate Low-Cost Surface-Mount Components Meets EIA/TIA-232E Specifications 1µA Low-Power Shutdown Mode Both Receivers Active During Low-Power Shutdown Three-State Receiver Outputs Flow-Through Pinout On-Board DC-DC Converters 20-Pin SSOP, Wide SO, or DIP Packages

MAX218：典型工作电路 应用 电池供电应用 计算机：台式机、工作站和服务器 仪表 调制解调器 外设 打印机

数据手册DataSheet

关键参数

技术资料

• Determining Clock Accuracy Requirements for UART Communications
• New RS-232 ICs Feature 1µA Supply Current, ±15kV ESD Protection, and 3V Operation

质量和环境数据

• MAX218.pdf

订购型号