The MAX3080-MAX3089 high-speed transceivers for RS-485/RS-422 communication contain one driver and one receiver. These devices feature fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX3080/MAX3081/MAX3082 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 115kbps. The MAX3083/MAX3084/MAX3085 offer higher driver output slew-rate limits, allowing transmit speeds up to 500kbps. The MAX3086/MAX3087/MAX3088's driver slew rates are not limited, making transmit speeds up to 10Mbps possible. The MAX3089's slew rate is selectable between 115kbps, 500kbps, and 10Mbps by driving a selector pin with a single three-state driver. These transceivers typically draw 375µA of supply current when unloaded, or when fully loaded with the drivers disabled. All devices have a 1/8-unit-load receiver input impedance that allows up to 256 transceivers on the bus. The MAX3082/MAX3085/MAX3088 are intended for halfduplex communications, while the MAX3080/MAX3081/ MAX3083/MAX3084/MAX3086/MAX3087 are intended for full-duplex communications. The MAX3089 is selectable between half-duplex and full-duplex operation. It also features independently programmable receiver and transmitter output phase via separate pins.
语言 | 下载文件 | 备注 |
---|---|---|
英文 | MAX3080-MAX3089.pdf | Rev 2; 03/2004 |
Part Number | Tx/Rx | Duplex | VSUPPLY (V) | ICC (mA) | Data Rate (kbps) | Tx EN | Rx EN | ICC (Shutdn.) (µA) | Rx/Tx on Bus | Rx Failsafe w/ Inputs | Slew Rate Limiting | Oper. Temp. (°C) | Package/Pins | Budgetary Price |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
typ | min | typ | See Notes | |||||||||||
MAX3080 | 1Tx + 1Rx | Full | 5 | 0.375 | 115 | Yes | Yes | 0.001 | 256 | Open or Shorted | No |
|
| $1.62 @1k |
MAX3081 | Full | 115 | No | No | - | No |
| $1.68 @1k | ||||||
MAX3082 | Half | 115 | Yes | Yes | 0.001 | No |
| $1.62 @1k | ||||||
MAX3083 | Full | 500 | Yes | Yes | 0.001 | No |
| $1.62 @1k | ||||||
MAX3084 | Full | 500 | No | No | - | No |
| $1.62 @1k | ||||||
MAX3085 | Half | 500 | Yes | Yes | 0.001 | No |
| $1.62 @1k | ||||||
MAX3086 | Full | 10000 | Yes | Yes | 0.001 | No |
| $1.62 @1k | ||||||
MAX3087 | Full | 10000 | No | No | - | No |
| $1.62 @1k | ||||||
MAX3088 | Half | 10000 | Yes | Yes | 0.001 | No |
| $1.62 @1k | ||||||
MAX3089 | Half/Full | 10000 | Yes | Yes | 0.001 | - |
| $1.62 @1k | ||||||
型号 | 状况 | 推荐替代产品 | 封装 | 温度 | RoHS/无铅 |
---|---|---|---|---|---|
MAX3082CPA | 停止供货 | MAX3082CPA+ | PDIP(N),;8引脚;81.9mm² | 0°C至+70°C | RoHS/无铅:否 |
MAX3082CPA+ | 生产中 | PDIP(N),;8引脚;81.9mm² | 0°C至+70°C | RoHS/无铅:无铅 | |
MAX3082CSA | 停止供货 | MAX3082CSA+ | SOIC(N),;8引脚;30.9mm² | 0°C至+70°C | RoHS/无铅:否 |
MAX3082CSA+ | 生产中 | SOIC(N),;8引脚;30.9mm² | 0°C至+70°C | RoHS/无铅:无铅 | |
MAX3082CSA+T | 生产中 | SOIC(N),;8引脚;30.9mm² | 0°C至+70°C | RoHS/无铅:无铅 | |
MAX3082CSA-T | 停止供货 | MAX3082CSA+T | SOIC(N),;8引脚;30.9mm² | 0°C至+70°C | RoHS/无铅:否 |
MAX3082EPA | 停止供货 | MAX3082EPA+ | PDIP(N),;8引脚;81.9mm² | -40°C至+85°C | RoHS/无铅:否 |
MAX3082EPA+ | 生产中 | PDIP(N),;8引脚;81.9mm² | -40°C至+85°C | RoHS/无铅:无铅 | |
MAX3082ESA | 停止供货 | MAX3082ESA+ | SOIC(N),;8引脚;30.9mm² | -40°C至+85°C | RoHS/无铅:否 |
MAX3082ESA+ | 生产中 | SOIC(N),;8引脚;30.9mm² | -40°C至+85°C | RoHS/无铅:无铅 | |
型号 | 状况 | 推荐替代产品 | 封装:类型 引脚 占位面积封装图 编码/变更 * | 温度 | RoHS/无铅? |
MAX3082ESA+T | 生产中 | SOIC(N),;8引脚;30.9mm² | -40°C至+85°C | RoHS/无铅:无铅 | |
MAX3082ESA-T | 停止供货 | MAX3082ESA+T | N.SO;8引脚 | -40°C至+85°C | 参考数据资料 |