• 简体中文
• English

MAX417：单、双、四路、1.2µA最大静态电流、单电源运算放大器

The MAX406/MAX407/MAX409/MAX417–MAX419 are single, dual, and quad low-voltage, micropower, precision op amps designed for battery-operated systems. They feature a supply current of less than 1.2µA per amplifier that is relatively constant over the entire supply range, which represents a 15 to 20 times improvement over industry-standard micropower op amps. A unique output stage enables these op amps to operate at ultra-low supply current while maintaining linearity under loaded conditions. In addition, the output is capable of sourcing 1.8mA when powered by a 9V battery. The common-mode input-voltage range extends from the negative rail to within 1.1V of the positive supply (for the singes, 1.2V for the duals and quads), and the output stage swings rail-to-rail. The entire family is designed to maintain good DC characteristics over the operating temperature range, minimizing the input referred errors. The MAX406 is a single op amp with two modes of operation: compensated mode and decompensated mode. Floating BW (pin 8) or connecting it to V- internally compensates the amplifier. In this mode, the MAX406 is unity-gain stable with a 5V/ms typical slew rate and an 8kHz gain bandwidth. Connecting BW to V+ puts the MAX406 into decompensated mode with a 20V/ms typical slew rate and a 40kHz gain bandwidth (AVCL ≥ 2V/V). The dual MAX407 and quad MAX418 are internally compensated to be unity-gain stable. The MAX409/MAX417/MAX419 single/dual/quad op amps feature 150kHz typical bandwidth, 75V/ms slew rate, and stability for gains of 10V/V or greater.

关键特性 1.2µA Max Quiescent Current per Amplifier +2.5V to +10V Single-Supply Range 500µV Max Offset Voltage (MAX406A/MAX409A) < 0.1pA Typical Input Bias Current Output Swings Rail-to-Rail Input Voltage Range Includes Negative Rail

MAX406、MAX407、MAX409、MAX417、MAX418、MAX419：典型工作电路 应用 电池供电系统 无绳电话 静电计放大器 血糖表 GPS方案 安全系统 IP摄像机 医疗仪器 面板表 pH计 光电二极管前置放大器 电表 可编程逻辑控制器(PLC)

数据手册DataSheet

关键参数

订购型号