• 简体中文
• English

MAX4271：3V至12V、限流型、热插拔控制器，带有自动重试以及DualSpeed/BiLevel故障保护

3V至12V热插拔控制器，提供闭锁保护或自动重试功能，8引脚SO封装

The MAX4271/MAX4272/MAX4273 comprise a complete family of integrated 3V to 12V hot-swap controllers. They allow the safe insertion and removal of circuit cards into live backplanes. The discharged filter capacitors of the circuit card provide a low impedance to the live backplane. High in-rush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. This family of hot-swap controllers prevents such problems by regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is completed, two on-chip comparators provide DualSpeed/BiLevel™ protection against short circuits, load glitches, and overcurrent conditions. In the event of a fault condition, the load is disconnected. Fault recovery is handled by unlatching (MAX4271), autoretry (MAX4272), or programmed (MAX4273) methods. The MAX4271 family includes many integrated features that reduce component count and design time. An on-board charge pump provides the gate drive for a low-cost, external n-FET. Integrated features like startup current regulation and current glitch protection eliminate external timing resistors and capacitors. Also featured are an open-drain status output to indicate a fault condition, and an adjustable overcurrent response time. The MAX4271 (latched fault protection) and MAX4272 (autoretry fault protection) come in 8-pin SO packages. The MAX4273 (full function) comes in the space-saving 16-pin QSOP package and 16-pin SO package. All parts are specified across the extended temperature range, and have an absolute maximum rating of 15V to provide extra protection against inductive kickback during board removal.

关键特性 Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External Components Unique Current Regulation Architecture Minimizes n-FET Linear Mode Duration Autoretry Feature (MAX4272/MAX4273) DualSpeed/BiLevel Current Limit Protects Against Current Glitches and Short Circuits Power-On RESET (MAX4273) 15V Absolute Maximum Rating Protects Against Inductive Kickbacks During Board Removal Internal Charge Pump Generates Gate Drive for External n-MOSFET Status Output Pin Indicates Fault/Safe Condition Space-Saving 8-Pin SO, 16-Pin QSOP Packages

MAX4271、MAX4272、MAX4273：典型工作电路 应用 PBX RAID 路由器/交换机 路由器/交换机 电信 无线基站

数据手册DataSheet

关键参数

开发工具

• MAX4273EVKIT

技术资料

• Understanding, Using, and Selecting Hot-Swap Controllers
• Flexible Hot-Swap Current Limiter Allows Thermal Protection

质量和环境数据

• MAX4271.pdf

相关产品

• MAX4370：电流调节热插拔控制器，带有DualSpeed/BiLevel故障保护

订购型号