• 简体中文
• English

MAX4550：串行控制、双路4x2、无喀嗒声的音频/视频模拟交叉点开关

The MAX4550/MAX4570 serial-interface, programmable, dual 4x2 audio/video crosspoint switches are ideal for multimedia applications. Each device contains two identical crosspoint switch arrays, each with four inputs and two outputs. To improve off-isolation, use the additional crosspoint inputs SA and SB as shunts. Each output is selectively programmable for clickless or regular mode operation. A set of internal resistive voltage-dividers supplies DC bias for each output when using AC-coupled inputs. Additionally, four auxiliary outputs control additional circuitry via the MAX4550/MAX4570's 2-wire or 3-wire interface. The MAX4550/MAX4570 feature 80Ω on-resistance, 10Ω on-resistance matching between channels, 5Ω on-resistance flatness, and 0.014% total harmonic distortion. Additionally, they feature off-isolation of at least -110dB in the audio frequency range and -78dB at 4MHz, with -95dB crosstalk in the audio frequency range and -54dB at 4MHz. The MAX4550 uses a 2-wire I²C-compatible serial interface, while the MAX4570 uses a 3-wire SPI™/QSPI™ or MICROWIRE™-compatible serial interface. These parts are available in 28-pin SSOP and wide SO packages and are tested over either the commercial (0°C to +70°C) or extended (-40°C to +85°C) operating temperature range.

关键特性 Selectable Soft Switching Mode for Clickless Audio Operation 43Ω Typical On-Resistance (±5V Supplies) 5Ω Typical On-Resistance Matching Between Channels 4Ω Typical On-Resistance Flatness 0.014% Total Harmonic Distortion with 1kΩ Load -110dB Off-Isolation at 20kHz -78dB Off-Isolation at 4MHz -95dB Crosstalk at 20kHz -54dB Crosstalk at 4MHz Serial Interface 2-Wire, Fast-Mode, I²C-Compatible (MAX4550) 3-Wire, SPI/QSPI/MICROWIRE-Compatible (MAX4570) Four Auxiliary Outputs that Extend µP Ports Single-Supply Operation: +2.7V to +5.5V Dual-Supply Operation: ±2.7V to ±5.5V

MAX4550、MAX4570：引脚配置 应用 高端音频系统 PC多媒体板 机顶盒 视频会议系统

数据手册DataSheet

关键参数

开发工具

• MAX4550EVKIT

质量和环境数据

• MAX4550.pdf

订购型号