• 简体中文
• English

MAX701：电源监测器，带有复位

上电复位 + 手动复位

The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The active-low RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V-powered circuits. The MAX702 is the simplest part in the family. When VCC falls to 4.65V, active-low RESET goes low. The MAX702 also provides a debounced manual reset input. The MAX701 performs the same functions but has both active-low RESET and RESET outputs. Their primary function is to provide a system reset. Accordingly, an active reset signal is supplied for low supply voltages and for at least 200ms after the supply voltage reaches its operating value. In addition to the features of the MAX701 and MAX702, the MAX700 provides preset or adjustable voltage detection so thresholds other than 4.65V can be selected, and adjustable hysteresis. All parts are supplied in 8-pin PDIP and Narrow SO packages in commercial and extended temperature ranges.

关键特性 Min 200ms Active-Low RESET Pulse on Power-Up, Power-Down, and During Low-Voltage Conditions Reset Threshold Factory Trimmed for +5V Systems No External Components or Adjustments with +5V-Powered Circuits Debounced Manual Reset Input Preset or Adjustable Voltage Detection (MAX700) Adjustable Hysteresis (MAX700) 8-Pin PDIP and Narrow SO Packages

MAX700、MAX701、MAX702：引脚配置 应用 计算机 控制器 精确的µP电源监控 智能仪表

数据手册DataSheet

关键参数

质量和环境数据

• MAX701.pdf

相关产品

• MAX809：3引脚微处理器复位电路
• MAX810：3引脚微处理器复位电路
• MAX811：4引脚微处理器电压监测器，带有手动复位输入
• MAX812：4引脚微处理器电压监测器，带有手动复位输入
• MAX6319：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6321：5引脚微处理器监控电路，带有看门狗定时及手动复位
• MAX6322：5引脚微处理器监控电路，带有看门狗定时及手动复位

订购型号