• 简体中文
• English

MAX881R：低噪声偏置电源、µMAX封装，带有电源就绪指示，用于GaAsFET PA

1mVP-P输出电压纹波

The MAX881R low-noise, inverting power supply is designed for biasing GaAsFET power amplifiers in portable wireless applications. This device is a chargepump inverter followed by a negative linear regulator. The input voltage range is 2.5V to 5.5V. The output is preset at -2.0V or can be set, using two resistors, to any voltage from -0.5V to (-VIN + 0.6V). It can deliver up to 4mA. The internal linear regulator also filters the output to 1mVP-P ripple and noise. Other features include a power-OK (active-low POK) output that signals when the negative voltage is within 7.5% of its set point. It protects the GaAsFET by not allowing power to be applied to the GaAsFET's drain until it is properly biased. The signal can be routed either to a microcontroller or directly to a switch at the GaAsFET drain. The MAX881R is available in a 10-pin µMAX® package.

关键特性 Small µMAX Package 1mVP-P Output Voltage Ripple and Noise Power-OK Signal to Control GaAsFET Drain Switch 0.05µA Logic-Controlled Shutdown 1ms Guaranteed Startup 2.5V to 5.5V Input -0.5V to (-VIN + 0.6V) Output at up to 4mA Operates with One 4.7µF and Three 0.22µF Capacitors (no inductors needed)

MAX881R：典型工作电路 应用 蜂窝电话无线调制解调器 PCS电话，双向寻呼 PHS手机，无线装置 无线手机，无线计算机

数据手册DataSheet

关键参数

开发工具

• MAX881REVKIT

质量和环境数据

• MAX881R.pdf

相关产品

• MAX852：低噪声、稳压型、负输出电荷泵，用于GaAsFET偏置电源

订购型号