• 简体中文
• English

MAX9150：低抖动、10端口LVDS转发器

业内抖动最低的多端口LVDS中继器

The MAX9150 low-jitter, 10-port, low-voltage differential signaling (LVDS) repeater is designed for applications that require high-speed data or clock distribution while minimizing power, space, and noise. The device accepts a single LVDS input and repeats the signal at 10 LVDS outputs. Each differential output drives a total of 50Ω, allowing point-to-point distribution of signals on transmission lines with 100Ω terminations on each end. Ultra-low 120ps (max) peak-to-peak jitter (deterministic and random) ensures reliable communication in high-speed links that are highly sensitive to timing error, especially those incorporating clock-and-data recovery, or serializers and deserializers. The high-speed switching performance guarantees 400Mbps data rate and less than 100ps skew between channels while operating from a single +3.3V supply. Supply current at 400Mbps is 160mA (max) and is reduced to 60µA (max) in low-power shutdown mode. Inputs and outputs conform to the EIA/TIA-644 LVDS standard. A fail-safe feature sets the outputs high when the input is undriven and open, terminated, or shorted. The MAX9150 is available in a 28-pin TSSOP package. Refer to the MAX9110/MAX9112 and MAX9111/MAX9113 data sheets for LVDS line drivers and receivers.

关键特性 Ultra-Low 120psp-p (max) Total Jitter (Deterministic and Random) 100ps (max) Skew Between Channels Guaranteed 400Mbps Data Rate 60µA Shutdown Supply Current Conforms to EIA/TIA-644 LVDS Standard Single +3.3V Supply Fail-Safe Circuit Sets Output High for Undriven Inputs High-Impedance LVDS Input when VCC = 0V

MAX9150：典型应用电路 应用 上/下路复用器 背板与互连应用 蜂窝电话基站 时钟/数据分配 数字交叉连接 网络路由器和交换机

数据手册DataSheet

关键参数

开发工具

• MAX9150EVKIT

质量和环境数据

• MAX9150.pdf

相关产品

• MAX9110：单/双路LVDS线驱动器，提供超低差分偏移，SOT23封装
• MAX9112：单/双路LVDS线驱动器，提供超低差分偏移，SOT23封装
• MAX9113：单/双路LVDS线接收器，提供超低脉冲偏差，SOT23封装
• MAX9111：单/双路LVDS线接收器，提供超低脉冲偏差，SOT23封装

订购型号