• 简体中文
• English

MAX933：超低功耗、低成本比较器、内置2%电压基准

The MAX931–MAX934 single, dual, and quad micropower, low-voltage comparators plus an on-board 2% accurate reference feature the lowest power consumption available. These comparators draw less than 4µA supply current over temperature (MAX931), and include an internal 1.182V ±2% voltage reference, programmable hysteresis, and TTL/CMOS outputs that sink and source current. Ideal for 3V or 5V single-supply applications, the MAX931–MAX934 operate from a single +2.5V to +11V supply (or a ±1.25V to ±5V dual supply), and each comparator's input voltage range extends from the negative supply rail to within 1.3V of the positive supply. The MAX931–MAX934's unique output stage continuously sources as much as 40mA. And by eliminating power-supply glitches that commonly occur when comparators change logic states, the MAX931–MAX934 minimize parasitic feedback, making them easier to use. The single MAX931 and dual MAX932/MAX933 provide a unique and simple method for adding hysteresis without feedback and complicated equations, using the HYST pin and two resistors. For applications that require increased precision with similar power requirements, see the MAX921–MAX924 data sheet. These devices include a 1% precision reference.

关键特性 Ultra-Low 4µA Max Quiescent Current over Extended Temp. Range (MAX931) Power Supplies: Single +2.5V to +11V Dual ±1.25V to ±5.5V Input Voltage Range Includes Negative Supply Internal 1.182V ±2% Bandgap Reference Adjustable Hysteresis TTL-/CMOS-Compatible Outputs 12µs Propagation Delay (10mV Overdrive) No Switching Crowbar Current 40mA Continuous Source Current Available in Space-Saving µMAX® Package

MAX931、MAX932、MAX933、MAX934：典型工作电路 应用 报警电路 电池供电应用 振荡器电路 门限检测器 窗比较器

数据手册DataSheet

关键参数

技术资料

• Pulsed Sensor Extends Battery Life
• Circuit Connection Adds Current-Mode Operation to PFM Boost Converters
• Overload Circuitry Protects Batteries and Power Supplies

订购型号