USB3300 _ BDTIC 中国领先电子元器件代理商

USB3300

The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status byte transfers between the Link and PHY.

This PHY was designed from the start with the ULPI interface. No UTMI to ULPI wrappers are used in this design which provides a seamless ULPI to Link interface. The result is a PHY with a low latency transmit and receive time. Microchip's low latency high speed and full speed receiver provide the option of re-using existing UTMI Links with a simple wrapper to convert UTMI to ULPI.

The ULPI interface allows the USB3300 PHY to operate as a device, host, or an On-The-Go (OTG) device. Designs using the USB3300 PHY as a device, can add host and OTG capability at a later date with no additional pins.

The ULPI interface, combined with Microchip's proprietary technology, makes the USB3300 the ideal method of adding Hi-Speed USB to new designs. The USB3300 features an industry leading small footprint package (5mm by 5mm) with sub 1mm height. In addition the USB3300 integrates all DP and DM termination resistances and requires a minimal number of external components.

产品特性

USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0
Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode
Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link controller interface
54.7mA Unconfigured Current (typical) - ideal for bus powered applications
83uA suspend current (typical) - ideal for battery powered applications
Latch-Up performance exceeds 150 mA per EIA/JESD 78, Class II
ESD protection levels of ±8kV HBM without external protection devices
Integrated protection to withstand IEC61000-4-2 ESD tests (±8kV contact and ±15kV air) per 3rd party test facility
Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)
Supports HS SOF and LS keep-alive pulse
Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applications
Supports OTG monitoring of VBUS levels with internal comparators. Includes support for an external VBUS or fault monitor.
Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI wrapper
Integrated Pull-up resistor on STP for interface protection allows a reliable Link/PHY start-up with slow Links (software configured for low power)
Internal 1.8 volt regulators allow operation from a single 3.3 volt supply
Internal short circuit protection of ID, DP and DM lines to VBUS or ground
Integrated 24MHz Crystal Oscillator supports either crystal operation or 24MHz external clock input
Internal PLL for 480MHz Hi-Speed USB operation
Industrial Operating Temperature -40°C to +85°C
32 pin, QFN RoHS Compliant package (5 x 5 x 0.90 mm height)
Cell Phones
PDAs
MP3 Players
Scanners
External Hard Drives
Digital Still and Video Cameras
Portable Media Players
Printers

技术参数

Parameter Name Value	Value
Description USB 2.0 ULPI PHY IC with OTG	USB 2.0 ULPI PHY IC with OTG
Upstream Port ULPI	ULPI
Reference Clock Freq 24MHz	24MHz
I/O Voltage (V) 3.3V	3.3V
Crystal Support Yes	Yes
OTG Yes	Yes
Temp. Range Min. -40	-40
Temp. Range Max. 85	85

文档资料

USB3300 Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface Data S	Data Sheets	06/30/2016	998KB
AN13.10 - USB3300 PHY Layout Guidelines	AppNote	04/25/2014	636KB
AN19.17 - ULPI Design Guide	AppNote	04/25/2014	375KB
AN26.21 - USB Device Design Checklist	AppNote	08/10/2015	386KB
USB3300 IBIS model 3300r100.ibs	IBIS	06/30/2006	68KB
USB3300 IBIS model 3300r101.ibs	IBIS	06/30/2006	325KB
USB3300 IBIS model 3300r102.ibs	IBIS	06/30/2006	274KB
USB3300 Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface Data B	Product Briefs	01/24/2013	301KB

订购型号

Part Number	Leads	Package Type	Temp Range	Packing	1+	26+	100+	1000+	5000+
USB3300-EZK	32	VQFN	-40C to +85C	TRAY	1.24	1.04	0.94	0.91	0.90
USB3300-EZK-CAG	32	VQFN	-40C to +85C	TRAY	1.36	1.14	1.03	1.00	0.99
USB3300-EZK-TR	32	VQFN	-40C to +85C	T/R	1.24	1.04	0.94	0.91	0.90
USB3300-EZK-TR-CAR	32	VQFN	-40C to +85C	T/R	**	**	**	**	**

相类似产品

Product	Upstream Port	Downstream Ports	I/O Voltage (v)	Price5K
USB3250	UTMI	USB	3.3V
USB3280	UTMI	USB	3.3V
USB3290	UTMI	USB	3.3V	$1.07
USB3300	ULPI	USB	3.3V	$0.90
USB3310	ULPI	USB	1.8V	$0.90
USB3311	ULPI	USB	1.8V	$0.90
USB3315	ULPI	USB	1.8V-3.3V	$0.90
USB3316	ULPI	USB	1.8V	$0.90
USB3317	ULPI	USB	1.8V-3.3V	$0.90
USB3318	ULPI	USB	1.8V-3.3V	$0.90
USB3319	ULPI	USB	1.8V	$0.90
USB3320	ULPI	USB	1.8V-3.3V	$1.12
USB3321	ULPI	USB	1.8V
USB3322	ULPI	USB	1.8V	$1.24
USB3326	ULPI	USB	1.8V	$1.24
USB3327	ULPI	USB	1.8V	$1.24
USB3329	ULPI	USB	1.8V	$1.24
USB3330	ULPI	USB	1.8V	$1.35
USB3331	ULPI	USB	1.8V	$1.35
USB3333	ULPI	USB	1.8V-3.3V	$1.35
USB3336	ULPI	USB	1.8V	$1.35
USB3338	ULPI	USB	1.8V	$1.35
USB3340	ULPI	USB	1.8V-3.3V	$1.12
USB3341	ULPI	USB	1.8V	$0.90
USB3343	ULPI	USB	1.8V-3.3V	$0.90
USB3346	ULPI	USB	1.8V	$0.90
USB3347	ULPI	USB	1.8V	$0.90
USB3370	ULPI	USB	1.8V to 3.3V	$1.12
USB3450	UTMI+	USB	3.3V
USB3500	UTMI+	USB	3.3V

器件无铅环保信息

PartNumber	DeviceWeight	ShippingWeight	LeadCount	PackageType	PackageWidth	SolderComposition	JEDECIndicator
USB3300-EZK-TR	0.063600	0.138000	32	VQFN	5x5x0.9mm	Matte Tin	e3
USB3300-EZK	0.063600	0.734694	32	VQFN	5x5x0.9mm	Matte Tin	e3
USB3300-EZK-TR-CAR	0.063600	0.138000	32	VQFN	5x5x0.9mm	Matte Tin	e3
USB3300-EZK-CAG	0.063600	0.734694	32	VQFN	5x5x0.9mm	Matte Tin	e3