NCN5150: Wired M-BUS Slave Transceiver _ BDTIC 中国领先电子元器件代理商

NCN5150: Wired M-BUS Slave Transceiver

The NCN5150 is a single-chip integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. The transceiver provides all of the functions needed to satisfy the European Standards EN 13757-2 and EN 1434-3 describing the physical layer requirements for M-BUS. It includes a programmable power level of up to 2 (SOIC version) or 6 (NQFP version) unit loads which are available for use in external circuits through a 3.3V LDO regulator. The NCN5150 can provide communication up to the maximum M-BUS communication speed of 38400 baud (half-duplex).

特性

Single-chip MBUS Transceiver
UART Communication Speeds Up to 38400 baud
Integrated 3.3 V VDD LDO Regulator with Extended Peak Current Capability of 15 mA
Supports Powering Slave Device from the Bus or from External Power Supply
Adjustable I/O Levels
Adjustable Constant Current Sink up to 2 or 6 Unit Loads Depending on the Package
Low Bus Voltage Operation
Extended Current Budget for External Circuits: at least 0.88 mA
Polarity Independent
Power-Fail Function
Fast Startup - No External Transistor Required on STC Pin
Industrial Ambient Temperature Range of -40C to +85C
Available in: - 16-pin SOIC (Pin-to-pin compatible with TSS721A)- 20-pin QFN
These are Pb-Free Devices

应用

Multi-Energy Utility meters- Water- Gas- Electricity- Heating systems

应用注释 (1)

Document Title	Document ID/Size	Revision	Revision Date
M-BUS Design Changes Between TSS721A and NCN5150	AND9108/D (483.0kB)	1

数据表 (1)

Document Title	Document ID/Size	Revision	Revision Date
Wired M-BUS Slave Transceiver	NCN5150/D (126kB)	3

评估板文档 (9)

Document Title	Document ID/Size	Revision
NCN5150 Evaluation Boards User's Manual	EVBUM2178/D (647.0kB)	0
NCN5150QFNGEVB Bill of Materials ROHS Compliant	NCN5150QFNGEVB_BOM_ROHS.PDF (36.0kB)	0
NCN5150QFNGEVB Gerber Layout Files (Zip Format)	NCN5150QFNGEVB_GERBER.ZIP (50.0kB)	0
NCN5150QFNGEVB Schematic	NCN5150QFNGEVB_SCHEMATIC.PDF (163.0kB)	0
NCN5150QFNGEVB Test Procedure	NCN5150QFNGEVB_TEST_PROCEDURE.PDF (223.0kB)	0
NCN5150SOICGEVB Bill of Materials ROHS Compliant	NCN5150SOICGEVB_BOM_ROHS.PDF (111.0kB)	0
NCN5150SOICGEVB Gerber Layout Files (Zip Format)	NCN5150SOICGEVB_GERBER.ZIP (43.0kB)	0
NCN5150SOICGEVB Schematic	NCN5150SOICGEVB_SCHEMATIC.PDF (152.0kB)	0
NCN5150SOICGEVB Test Procedure	NCN5150SOICGEVB_TEST_PROCEDURE.PDF (223.0kB)	1

封装图纸 (2)

Document Title	Document ID/Size	Revision
QFN20, 4x4, 0.5P	485E (60.9kB)	B
SOIC 16 LEAD	751B (38.2kB)	K

评估板与开发工具

产品	状况	Compliance	简短说明
NCN5150QFNGEVB	Active	Pb-free	Wired M-BUS Slave Transceiver, 6 unit loads, Evaluation Board
NCN5150SOICGEVB	Active	Pb-free	Wired M-BUS Slave Transceiver, 2 unit loads, Evaluation Board

产品订购型号

产品	状况	Compliance	封装		MSL*	容器		预算价格 (1千个数量的单价）
NCN5150DG	Active	Pb-free Halide free	SOIC-16	联系BDTIC	2	Tube	48	$1.09
NCN5150DR2G	Active	Pb-free Halide free	SOIC-16	联系BDTIC	2	Tape and Reel	3000	$1.05
NCN5150MNTWG	Active	Pb-free Halide free	QFN-20	联系BDTIC	1	Tape and Reel	2500	$1.03

订购产品技术参数

Product	Data Transmission Standard	Data Rate	Number of Drivers	Number of Receivers	VCC Min (V)	VCC Max (V)
NCN5150DG	M-BUS	38400 baud	1	1	3.1	3.6
NCN5150DR2G	M-BUS	38400 baud	1	1	3.1	3.6
NCN5150MNTWG	M-BUS	38400 baud	1	1	3.1	3.6

Datasheet: Wired M-BUS Slave Transceiver (126kB) NCN5150













Other: QFN20, 4x4, 0.5P NCS5651; SOIC 16 LEAD FS7140; M-BUS Design Changes Between TSS721A and NCN5150 NCN5150; EVBUM2178/D - 647 NCN5150SOICGEVB; NCN5150QFNGEVB BOM ROHS NCN5150QFNGEVB; NCN5150QFNGEVB GERBER NCN5150QFNGEVB; NCN5150QFNGEVB SCHEMATIC NCN5150QFNGEVB; NCN5150QFNGEVB TEST PROCEDURE NCN5150QFNGEVB; NCN5150SOICGEVB BOM ROHS NCN5150SOICGEVB; NCN5150SOICGEVB GERBER NCN5150SOICGEVB; NCN5150SOICGEVB SCHEMATIC NCN5150SOICGEVB; NCN5150SOICGEVB TEST PROCEDURE NCN5150SOICGEVB